Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; How To Clean - Konig HC-AH50 Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12

Cleaning and Maintenance

Ensure you have unplugged the plug from the socket before you clean the device.
Otherwise it may cause electric shock or accidents.
Attention
Please wait until the water has cooled down before cleaning to avoid the risk of burns.
Maintaining the exterior of the device
Please use a soft damp cloth to wipe the outer surfaces.
Do not clean the device completely, otherwise this will cause an electric shock.
Do not use solvent, gasoline, xylene, talcum powder or brushes. They may cause
Attention
deterioration or colour loss.
Water Slot Maintenance
Wipe off water scale inside the water slot with a soft wet
cloth
You can use the brush supplied to brush away water scale
or minute particles and wipe with a soft cloth
Clean the device once or twice per week
Buoy Maintenance
Ensure any dust that collects on the buoy is cleaned off
regularly
You can use the brush attached to brush away water
scale on minute parts and wipe again with soft cloth
Clean the buoy once or twice per week
Atomizer Maintenance
Use the brush supplied to remove the scale on the
surface of the atomizer and then wipe again with a soft
cloth
Clean the atomizer once or twice per week
Do not use a metal or abrasive brush, metal blade or talcum powder to wipe the surface of
the atomizer. It may cause deformation, resulting in lower misting performance or other
Attention
malfunctions.
Maintenance of Water Tank and Misting Nozzle
1. Take off the misting nozzle and turn clockwise to remove the cover of the water tank located at the
bottom of the tank and dispose of any remaining water. The misting nozzle will fall off if you
dispose water in the tank without first taking it off.
2. Clean the water tank and its cover with clean water. Clean the water tank cover carefully. Do not
clean with force, or it may cause water leakage.
3. Dry with a soft cloth after wiping off the scale on the surface of the misting nozzle. Clean the
exterior of the device with a soft damp cloth.

How to Clean

9
Water reservoir
buoy
atomizer

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis