Community Playthings A313 Montageanleitung

Installation instructions
A313, A314, A316, A317, A318, A319 Wall cubbies
Installation
A competent carpenter or maintenance person should install your Wall cubbies.
1. Attach the Wall cubbies to the wall with at least four fasteners (as shown in the image below). Use fasteners that are
suitable for the wall construction and the weight of the fully loaded item (fasteners are not included in the delivery).
2. Holes should be pre-drilled through the back of the cubby for the fasteners to pass through.
3. Once you have finished, make sure that the fixings safely support the weight of the fully loaded cubbies.
WARNING
The Wall cubbies must be properly mounted to a wall before use.
It is the customer's responsibility to ensure that the item is securely attached.
Recomended cubby mounting heights:
Age of child (years)
Recommended height to
bottom of cubby
Community Playthings, Brightling Road, Robertsbridge, TN32 5DR
communityplaythings.co.uk • sales@communityplaythings.co.uk • 0800 387 457
© 2022 by Community Products (UK) Ltd • JV84 Eu 0580 Revision 00
2 3
75 cm 81 cm 87 cm
Refer to the table above for the
recommended mounting height
for your ages of children.
4 5 6
92 cm 99 cm
Fasteners