Community Playthings W303 Gebrauchsanleitung

Product guide
W303,W304 Outlast storage unit
IMPORTANT
Save these instructions for reference
Recommended use
The Outlast storage unit is intended for the storage of
children's play equipment at the point of use. Designed
to house the Outlast crates and Outlast blocks, this unit
allows children to help with clean-up. This unit can be
placed on any reasonably level area. Once levelled with
levelling pads (provided) and built-in adjustable feet, it is
ready for use.
The door latch can be locked with a 6-8 mm padlock
with extra-length shackle (not included). The roof is
waterproof.
WARNING
c This product is intended for use by children of immature judg-
ment and therefore adult supervision is required at all times.
c The Storage unit is not a play structure.
c Do not climb on shelf or roof.
c This item is heavy. Use care during installation to avoid back
injuries.
c Unit may settle overtime. Periodically inspect unit for stability,
and adjust feet as necessary.
CAUTION
c Unit must be levelled prior to use to ensure stability and proper
latching.
c Levelling pads (provided) must be used if unit is placed on soft or
uneven surfaces.
c Do not stack levelling pads more than four high.
c When doors are open, latch them against the side of the unit to
prevent children from playing with them.
c Do not place heavy objects on the roof where they may fall off.
Assembly
Your shipment contains:
One Outlast storage unit, six levelling pads, one spirit level, and this
product guide.
If your shipment is incomplete, please call customer
service. All of our packaging is recyclable (cardboard and
LDPE). Please recycle in accordance with local guidelines.
Community Playthings, Brightling Road, Robertsbridge, TN32 5DR
communityplaythings.co.uk • sales@communityplaythings.co.uk • 0800 387 457
© 2019 by Community Products (UK) Ltd •
VE25 Eu 0709 Revision 01
Cleaning
Mud and dirt can be removed with scrub brush and water. Over time
outdoors, surfaces may blacken with mildew. Remove with detergent
or a disinfectant solution such as Milton Sterilising Fluid.
Maintenance
Acetylated wood weathers to a natural silver grey if left untreated
outdoors. If you prefer the original look, scrub with a mild detergent
or disinfectant solution. When dry, apply a tinted, nontoxic penetrat-
ing stain. Refinishing stain is available from customer service.
Periodically check that unit is stable and level. Adjust front levelling
feet to align doors.
Periodically inspect for splinters, broken or loose parts, and/or
malfunctions. Remove from service when any condition develops that
might make operation unsafe.
Construction
The wooden components are manufactured from long lasting
acetylated wood and finished with a tinted nontoxic stain. All
edges and corners are rounded for safety and ease of cleaning.
Stainless steel hardware is used throughout and plastic components
are formulated to ensure long life in sun, or varying temperature
conditions. The roof has no sharp edges and is built from solid wood
mouldings with a plastic underlayment to ensure maximum strength
as well as waterproofing.
User Modifications
We are not responsible for modifications made by customers to our
products in the field without our supervision, testing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service with a descrip-
tion of the part(s) needed and the ID Code from the product.
Use only replacement parts supplied by
Community Playthings.