Cisco Systems Linksys WMP54G Schnellinstallationsanleitung Seite 177

Wireless-G PCI Adapter
RADIUS
RADIUS uses the security of a RADIUS server. (This should only be used when a RADIUS server is connected to
the Router.) It offers two authentication methods: EAP-TLS and PEAP.
Authentication - Select the authentication method your network is using, EAP-TLS or PEAP.
EAP-TLS
Enter the Login name of your wireless network in the Login Name field. From the Certificate drop-down menu,
select the certificate you have installed to authenticate you on your wireless network.
PEAP
Enter the Login name of your wireless network in the Login Name field. Enter the password of your wireless
network in the Password field. From the Certificate drop-down menu, select the certificate you have installed
to authenticate you on your wireless network. Then select the authentication method (Inner Authen.) used
inside the PEAP tunnel. Select from EAP-MSCHAP v2 or Generic Token Card. If you select Generic Token
Card, a Password Mode drop-down menu will appear with Static or Soft Token as choices. Then, select the
type of encryption, TKIP or AES, from the Encryption drop-down menu.
Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the
previous screen.
Chapter 3: Setting up and Connecting the PCI Adapter
Setting Up the Adapter
All manuals and user guides at all-guides.com
Figure 3-26: Wireless Security - RADIUS - EAP-TLS
Figure 3-27: Wireless Security - RADIUS - PEAP
19