Inhaltszusammenfassung für Cisco Systems Linksys WMP54GR
Seite 1
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Package Contents • Wireless-G PCI Adapter with RangeBooster • Two Antennas • Setup CD-ROM • User Guide (English only) on CD-ROM • Quick Installation 24 , Wireless-G 802.11g...
Seite 2
All manuals and user guides at all-guides.com Begin Installation Do not insert the Adapter until you are instructed to do so; otherwise, IMPORTANT: the setup will not work. The Adapter is installed and set up using the Setup Wizard included on the Setup CD-ROM.
Seite 3
All manuals and user guides at all-guides.com Connect the Adapter During installation of the Adapter, follow these guidelines: IMPORTANT: Make sure that you are free of any static electricity. If necessary, touch the • metal case of your computer before you install the Adapter. Do not use a magnetic screwdriver.
Seite 4
Set Up the Adapter All manuals and user guides at all-guides.com The Available Wireless Network screen offers two options for setting up the Adapter. • Available Wireless Network. Most users should use this option. The networks available to this Adapter will be listed on this screen.
Seite 5
All manuals and user guides at all-guides.com Needed for Connection All of the devices on IMPORTANT: screen will appear. If your your network must use the same network uses WPA Personal security method in order to security, the WPA-Personal communicate with each other. Needed for Connection screen will appear.
Seite 6
All manuals and user guides at all-guides.com WPA-Personal for Connection Select the encryption method you want to use. Then enter a passphrase. Encryption - Select the type of algorithm you want to use, TKIP or AES. WPA-Personal Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters.
Seite 7
All manuals and user guides at all-guides.com Setting Up the Adapter with Manual Setup Click Manual Setup on the Available Wireless Network screen to set up the Adapter manually. If your network has a router or other DHCP server, click Obtain network settings automatically (DHCP).
Seite 8
All manuals and user guides at all-guides.com Select the wireless mode you want to use. Then, enter the SSID for your network. Infrastructure Mode - Use this mode if the Adapter will connect to a wireless router or access point. Ad-Hoc Mode - Use this mode if the Adapter will directly connect to another wireless...
Seite 9
All manuals and user guides at all-guides.com The Wireless Security screen will appear. If your wireless network doesn’t use wireless security, select Disabled and then click Next. Proceed to Step E. Select the security method you want to use: WEP , WPA Personal, PSK2, WPA Enterprise, or RADIUS.
Seite 10
All manuals and user guides at all-guides.com Select a level of WEP encryption to use, and then enter a passphrase or WEP key. WEP - Select 64-bit or 128-bit. Passphrase - Enter a passphrase, so a WEP key is automatically generated. The passphrase is case-sensitive and should not be longer than 31 alphanumeric characters.
Seite 11
All manuals and user guides at all-guides.com WPA Personal Select an encryption method and then enter a passphrase. Encryption - Select the type of algorithm you want to use, TKIP or AES. Passphrase - Enter a WPA Personal Passphrase, also called a pre-shared key, of 8-63 characters.
Seite 12
All manuals and user guides at all-guides.com After the software has been successfully installed, the Congratulations screen will appear. Click Connect to Network to connect to your network. Click Return to Profiles screen to open the Wireless Network Monitor’s Profiles screen.
Seite 13
Use the Wireless Network Monitor All manuals and user guides at all-guides.com After the Adapter has been configured, the Wireless Network Monitor icon will appear in your Monitor Icon notebook’s system tray. Double-click the icon to open the Wireless Network Monitor. Use the Wireless Network Monitor to check the link information, search for available wireless networks (click the...
Seite 15
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Pakkens indhold • Trådløs-G-PCI-kort med RangeBooster • To antenner • Installations-cd-rom • Brugervejledning (kun på engelsk) på cd-rom • Installationsvejledning 24 , Trådløs-G 802.11g PCI-netværkskort med RangeBooster...
Seite 16
All manuals and user guides at all-guides.com Start installation Tilslut ikke netværkskortet, før du bliver bedt om at tilslutte det – ellers VIGTIGT: kan konfigurationen ikke gennemføres. Netværkskortet installeres og konfigureres ved hjælp af den guidede konfiguration på den medfølgende cd. Placer først cd-rom'en med den guidede konfiguration i cd-rom-drevet på...
Seite 17
All manuals and user guides at all-guides.com Tilslutning af kortet Under installationen af kortet skal du følge disse retningslinjer: VIGTIGT: Kontroller, at du ikke er ladet med statisk elektricitet. Rør om nødvendigt ved • computerens metalkabinet, før du installerer kortet. Du må...
Seite 18
Konfiguration af netværkskortet All manuals and user guides at all-guides.com Skærmbilledet Available Wireless Network (Tilgængelige trådløse netværk) indeholder to muligheder for at konfigurere netværkskortet. • Available Wireless Network (Tilgængelige trådløse netværk). De fleste brugere bør bruge denne indstilling. Dette skærmbillede indeholder en oversigt over tilgængelige netværk for dette netværkskort.
Seite 19
All manuals and user guides at all-guides.com sikkerhed. Hvis dit netværk bruger Alle enheder i VIGTIGT: WEP-kryptering (Wired Equivalent netværket skal bruge samme Privacy), vises skærmbilledet WEP sikkerhedstilstand for at kunne Key Needed for Connection (WEP-nøgle skal bruges til kommunikere med hinanden. oprettelse af forbindelse).
Seite 20
All manuals and user guides at all-guides.com WPA-Personal for Connection (WPA-Personal til oprettelse af forbindelse) Vælg den krypteringsmetode, som du vil bruge: Indtast derefter et adgangsord. Encryption (Kryptering) – vælg den algoritmetype, du vil bruge, TKIP eller AES. WPA-Personal Passphrase (Adgangsord) – indtast et adgangsord, også...
Seite 21
All manuals and user guides at all-guides.com Konfiguration af netværkskortet med manuel konfiguration Klik på Manual Setup (Manuel konfiguration) på skærmbilledet Available Wireless Network (Tilgængelige trådløse netværk) for at konfigurere netværkskortet manuelt. Hvis netværket har en router eller en anden DHCP-server, skal du klikke på...
Seite 22
All manuals and user guides at all-guides.com Vælg den trådløse tilstand, du vil bruge. Indtast derefter SSID'et til dit netværk. Infrastructure Mode (Infrastrukturtilstand) – brug denne tilstand, hvis netværkskortet skal oprette forbindelse til en trådløs router eller et trådløst access point. Ad-Hoc Mode (Ad-hoc- tilstand) –...
Seite 23
All manuals and user guides at all-guides.com Skærmbilledet Wireless Security (Trådløs sikkerhed) vises. Hvis dit trådløse netværk ikke bruger trådløs sikkerhed, skal du vælge Disabled (Deaktiveret) og derefter klikke på Next (Næste). Fortsæt til trin E. Vælg den sikkerhedsmetode, du vil bruge: WEP , WPA Personal, PSK2, WPA Enterprise eller RADIUS.
Seite 24
All manuals and user guides at all-guides.com Vælg et niveau for WEP- kryptering, og indtast derefter et adgangsord eller en WEP-nøgle. WEP – vælg 64-bit eller 128-bit. Passphrase (Adgangsord) – indtast et adgangsord, så der automatisk oprettes en WEP- nøgle. Der skelnes mellem store og små...
Seite 25
All manuals and user guides at all-guides.com WPA Personal Vælg en krypteringsmetode, og indtast derefter et adgangsord. Encryption (Kryptering) – vælg den algoritmetype, du vil bruge, TKIP eller AES. WPA Personal Passphrase (Adgangsord) – indtast et adgangsord, også kaldet en Pre-Shared Key, på mellem 8 og 63 tegn.
Seite 26
All manuals and user guides at all-guides.com Når softwaren er installeret vises skærmbilledet Congratulations (Tillykke). Klik på Connect to Network (Opret forbindelse til netværk) for at oprette forbindelse til dit netværk. Klik på Return to Profiles screen (Vend tilbage til skærmbilledet Profiler) for at åbne skærmbilledet Profiles (Profiler) for den trådløse...
Seite 27
Brug af den trådløse All manuals and user guides at all-guides.com netværksovervågning Når netværkskortet er konfigureret, vises ikonet for den trådløse netværksovervågning i proceslinjen Ikon for netværks- på din notebook. Dobbeltklik på ikonet for at åbne den trådløse overvågning netværksovervågning. Du kan bruge den trådløse netværksovervågning til at kontrollere linkoplysninger, søge efter...
Seite 29
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Lieferumfang • Wireless-G PCI-Adapter mit RangeBooster • Zwei Antennen • Installations-CD-ROM • Benutzerhandbuch (nur auf Englisch verfügbar) auf CD-ROM • Kurzanleitung 24 , Wireless-G 802.11g PCI-Adapter mit RangeBooster...
Seite 30
All manuals and user guides at all-guides.com Starten mit der Installation WICHTIG: Setzen Sie den Adapter erst dann ein, wenn Sie dazu aufgefordert werden. Andernfalls schlägt die Installation fehl. Der Adapter wird über den Setup- Assistenten, der auf der Installations-CD- ROM enthalten ist, installiert und eingerichtet.
Seite 31
All manuals and user guides at all-guides.com Anschließen des Adapters WICHTIG: Befolgen Sie während der Installation diese Richtlinien: • Stellen Sie sicher, dass Sie keine elektrostatische Ladung mit sich tragen. Berühren Sie gegebenenfalls das Metallgehäuse des Computers, bevor Sie den Adapter installieren. •...
Seite 32
Einrichten des Adapters All manuals and user guides at all-guides.com Das Fenster Available Wireless Network (Verfügbares Wireless-Netzwerk) enthält zwei Optionen für die Einrichtung des Adapters. • Available Wireless Network (Verfügbares Wireless-Netzwerk). Die meisten Benutzer werden diese Option wählen. Die für diesen Adapter verfügbaren Netzwerke werden in diesem Fenster aufgeführt.
Seite 33
All manuals and user guides at all-guides.com verwendet, wird das Fenster WEP WICHTIG: Alle Geräte in Ihrem Key Needed for Connection (WEP- Netzwerk müssen dieselbe Schlüssel für Verbindung erfor- Sicherheitsmethode verwenden, um derlich) angezeigt. Wenn Ihr Daten austauschen zu können. Netzwerk die Sicherheitsmethode WPA-Personal verwendet, wird das Fenster WPA-Personal Needed for...
Seite 34
All manuals and user guides at all-guides.com WPA-Personal Needed for Connection (WPA-Personal für Verbindung erforderlich) Wählen Sie die gewünschte Verschlüsselungsmethode aus. Geben Sie anschließend eine Passphrase ein. Encryption (Verschlüsselung): Wählen Sie den gewünschten Algorithmus aus (TKIP oder AES). „WPA Personal“ Passphrase: Geben Sie eine (WPA-Personal) Passphrase (auch als vorläufiger...
Seite 35
All manuals and user guides at all-guides.com Einrichten des Adapters mit der Funktion „Manual Setup“ (Man- uelles Einrichten) Klicken Sie im Fenster Available Wireless Network (Verfügbares Wireless-Netzwerk) auf Manual Setup (Manuelles Einrichten), um den Adapter manuell einzurichten. Wenn Ihr Netzwerk über einen Router oder einen anderen DHCP- Server verfügt, klicken Sie auf Obtain network settings automatically...
Seite 36
All manuals and user guides at all-guides.com Wählen Sie den gewünschten Wireless-Modus aus. Geben Sie anschließend die SSID für Ihr Netzwerk ein. Infrastructure Mode (Infrastrukturmodus): Verwenden Sie diesen Modus, wenn der Adapter mit einem Wireless-Router oder Access Point verbunden werden soll. Ad-Hoc Mode (Ad-Hoc-Modus): Verwenden Sie diesen Modus, wenn der Adapter direkt mit...
Seite 37
All manuals and user guides at all-guides.com Das Fenster Wireless Security (Wireless-Sicherheit) wird angezeigt. Wenn Ihr Wireless-Netzwerk keine Wireless-Sicherheitsmethode verwendet, wählen Sie Disabled (Deaktiviert) aus, und klicken Sie auf Next (Weiter). Fahren Sie mit Schritt E fort. Wählen Sie die gewünschte Sicherheitsmethode aus: WEP , WPA-Personal, PSK2, WPA- Enterprise oder RADIUS.
Seite 38
All manuals and user guides at all-guides.com Wählen Sie die gewünschte WEP- Verschlüsselungsebene aus, und geben Sie anschließend eine Passphrase oder einen WEP- Schlüssel ein. WEP: Wählen Sie 64-bit (64-Bit) oder 128-bit (128-Bit). Passphrase: Geben Sie eine Passphrase in das Feld ein, sodass automatisch ein WEP-Schlüssel generiert wird.
Seite 39
All manuals and user guides at all-guides.com „WPA Personal“ (WPA-Personal) Wählen Sie eine Verschlüsselungs- methode aus, und geben Sie anschließend eine Passphrase ein. Encryption (Verschlüsselung): Wählen Sie den gewünschten Algorithmus aus (TKIP oder AES). Passphrase: Geben Sie eine „WPA Personal“ Passphrase (auch als vorläufiger (WPA-Personal) gemeinsamer Schlüssel bezeich-...
Seite 40
All manuals and user guides at all-guides.com Nach der erfolgreichen Installation der Software wird das Glückwunschfenster angezeigt. Klicken Sie auf Connect to Network (Mit Netzwerk verbinden), um eine Verbindung zu Ihrem Netzwerk herzustellen. Klicken Sie auf Return to Profiles screen (Zurück zum Fenster Profile), um das Fenster Profiles (Profile) des Wireless-Netzwerkmonitors zu...
Seite 41
Verwenden des All manuals and user guides at all-guides.com Wireless-Netzwerkmonitors Nachdem der Adapter konfiguriert wurde, wird das Symbol für den Wireless- Netzwerkmonitor in der Taskleiste Ihres Notebooks angezeigt. Doppelklicken Sie Monitorsymbol auf das Symbol, um den Wireless- Netzwerkmonitor zu öffnen. Verwenden Sie den Wireless-Netzwerk- monitor, um die Verbindungsdaten zu überprüfen, nach verfügbaren Wireless-...
Seite 43
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenido del paquete • Adaptador PCI Wireless-G con RangeBooster • Dos antenas • CD-ROM de configuración • Guía del usuario (sólo en inglés) en CD-ROM • Guía de instalación rápida...
Seite 44
All manuals and user guides at all-guides.com Comienzo de la instalación No introduzca el adaptador hasta que no reciba la indicación a tal IMPORTANTE: efecto; de lo contrario, la configuración será incorrecta. El adaptador se instala y configura mediante el asistente de configuración que se incluye en el CD-ROM de configuración.
Seite 45
All manuals and user guides at all-guides.com Conexión del adaptador Durante la instalación del adaptador, siga estas pautas: IMPORTANTE: Asegúrese de que no tiene electricidad estática. Si es necesario, toque la carcasa • de metal del ordenador antes de instalar el adaptador. No utilice un destornillador magnético.
Seite 46
Configuración del adaptador All manuals and user guides at all-guides.com La pantalla Available Wireless Network (Red inalámbrica disponible) ofrece dos opciones para configurar el adaptador. • Available Wireless Network (Red inalámbrica disponible). La mayoría de usuarios deben utilizar esta opción. En esta pantalla se mostrarán las redes disponibles para este adaptador.
Seite 47
All manuals and user guides at all-guides.com WEP Key Needed for Todos los IMPORTANTE: Connection (Se necesita clave dispositivos de la red deben WEP para la conexión). Si la red utiliza la seguridad WPA utilizar el mismo método de Personal, aparecerá la pantalla seguridad para establecer WPA-Personal Needed for comunicación entre sí.
Seite 48
All manuals and user guides at all-guides.com WPA-Personal for Connection (WPA-Personal para conexión) Seleccione el método de encriptación que desee utilizar. A continuación, introduzca una frase de paso. Encryption (Encriptación): Seleccione el tipo de algoritmo que desee utilizar, TKIP o AES. WPA-Personal Passphrase (Frase de paso): Introduzca una frase de paso...
Seite 49
All manuals and user guides at all-guides.com Configuración del adaptador con Manual Setup (Configuración manual) Haga clic en Manual Setup (Configuración manual) en la pantalla Available Wireless Network (Red inalámbrica disponible) para configurar el adaptador manualmente. Si la red tiene un ruteador u otro servidor DHCP , haga clic en Obtain network settings automatically (DHCP)
Seite 50
All manuals and user guides at all-guides.com Seleccione el modo inalámbrico que desee utilizar. A continuación, introduzca el SSID de la red. Infrastructure Mode (Modo de infraestructura): Utilice este modo si el adaptador va a conectarse a un ruteador o a un punto de acceso inalámbrico.
Seite 51
All manuals and user guides at all-guides.com Aparecerá la pantalla Wireless Security (Seguridad inalámbrica). Si la red inalámbrica no utiliza seguridad inalámbrica, seleccione Disabled (Desactivada) y, a continuación, haga clic en Next (Siguiente). Vaya al paso E. Seleccione el método de seguridad que desea utilizar: WEP , WPA Personal, PSK2, WPA Disabled...
Seite 52
All manuals and user guides at all-guides.com Seleccione el nivel de encriptación WEP que desea utilizar y, a continuación, introduzca una frase de paso o clave WEP . WEP: Seleccione 64-bit (64 bits) o 128-bit (128 bits). Passphrase (Frase de paso): Introduzca una frase de paso para que se genere automáticamente una clave...
Seite 53
All manuals and user guides at all-guides.com WPA Personal Seleccione un método de encriptación y, a continuación, introduzca una frase de paso. Encryption (Encriptación): Seleccione el tipo de algoritmo que desee utilizar, TKIP o AES. Passphrase (Frase de paso): WPA Personal Introduzca una frase de paso (también denominada clave precompartida) de entre 8 y...
Seite 54
All manuals and user guides at all-guides.com Una vez instalado correctamente el software, aparece la pantalla Congratulations (Enhorabuena). Haga clic en Connect to Network (Conectar a la red) para conectarse a la red. Haga clic en Return to Profiles screen (Volver a la pantalla Perfiles) para abrir la pantalla Profiles (Perfiles) del monitor de red...
Seite 55
Uso del monitor de red inalámbrica All manuals and user guides at all-guides.com Una vez configurado el adaptador, aparecerá el icono del monitor de red inalámbrica en la bandeja del Icono del monitor sistema del ordenador portátil. Haga doble clic en el icono para abrir el monitor de red inalámbrica.
Seite 57
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenu de l'emballage • Adaptateur PCI sans fil G avec RangeBooster • Deux antennes • CD-ROM d'installation • Guide de l'utilisateur (en anglais uniquement) sur le CD-ROM •...
Seite 58
All manuals and user guides at all-guides.com Début de l'installation IMPORTANT : N'insérez pas l'adaptateur avant d'y être invité. L'installation pourrait échouer. L'adaptateur est installé et configuré à l'aide de l'Assistant de configuration inclus dans le CD-ROM d'installation. Commencez par insérer le CD-ROM de l'Assistant de configuration dans le lecteur de CD-ROM de votre ordinateur.
Seite 59
All manuals and user guides at all-guides.com Connexion de l'adaptateur IMPORTANT : Lors de l'installation de l'adaptateur, suivez les instructions ci-dessous : • Assurez-vous que vous ne soyez porteur d'aucune charge d'électricité statique. Si nécessaire, touchez une partie métallique de votre ordinateur avant d'installer l'adaptateur.
Seite 60
Configuration de l'adaptateur All manuals and user guides at all-guides.com L'écran Available Wireless Network (Réseaux sans fil disponibles) contient deux options de configuration de l'adaptateur. • Available Wireless Network (Réseaux sans fil disponibles). La plupart des utilisateurs doivent utiliser cette option. Les réseaux disponibles pour l'adaptateur s'affichent à...
Seite 61
All manuals and user guides at all-guides.com (Clé WEP requise pour la IMPORTANT : Tous les connexion) s'affiche. Si votre périphériques de votre réseau réseau utilise la méthode de doivent utiliser la même méthode sécurité WPA personnel, l'écran de sécurité pour communiquer WPA-Personal Needed for Connection (WPA personnel requis entre eux.
Seite 62
All manuals and user guides at all-guides.com WPA - Personal Needed for Connection (WPA personnel requis pour la connexion) Sélectionnez une méthode de cryptage. Ensuite, saisissez une phrase de passe. Encryption (Cryptage) : sélectionnez le type d'algorithme que vous souhaitez utiliser (TKIP WPA-Personal ou AES).
Seite 63
All manuals and user guides at all-guides.com Configuration manuelle de l'adaptateur Cliquez sur Manual Setup (Configuration manuelle) dans l'écran Available Wireless Network (Réseaux sans fil disponibles) pour configurer manuellement l'adaptateur. Si votre réseau utilise un routeur ou un autre serveur DHCP , sélectionnez Obtain network settings automatically (DHCP) (Obtenir les paramètres réseau...
Seite 64
All manuals and user guides at all-guides.com Sélectionnez le mode sans fil que vous souhaitez utiliser. Saisissez ensuite le SSID de votre réseau. Infrastructure Mode (Mode Infrastructure) : sélectionnez ce mode si l'adaptateur est connecté à un routeur ou à un point d'accès sans fil. Ad-Hoc Mode (Mode Ad hoc) : sélectionnez ce mode si l'adaptateur est connecté...
Seite 65
All manuals and user guides at all-guides.com L'écran Wireless Security (Sécurité sans fil) s'affiche. Si votre réseau sans fil n'utilise pas la sécurité sans fil, sélectionnez Disabled (Désactivée), puis cliquez sur Next (Suivant). Passez à l'étape E. Sélectionnez la méthode de sécurité...
Seite 66
All manuals and user guides at all-guides.com Sélectionnez le niveau de cryptage WEP à utiliser, puis saisissez la phrase de passe ou la clé WEP . WEP : sélectionnez 64-bit (64 bits) ou 128-bit (128 bits). Passphrase (Phrase de passe) : saisissez une phrase de passe.
Seite 67
All manuals and user guides at all-guides.com WPA Personal (WPA personnel) Sélectionnez une méthode de cryptage, puis saisissez une phrase de passe. Encryption (Cryptage) : sélectionnez le type d'algorithme que vous souhaitez utiliser (TKIP ou AES). WPA Personal Passphrase (Phrase de passe) : (WPA personnel) saisissez une phrase de passe, également appelée «...
Seite 68
All manuals and user guides at all-guides.com Une fois l'installation du logiciel terminée, l'écran Congratulations (Félicitations) s'affiche. Cliquez sur Connect to Network (Connexion au réseau) pour vous connecter à votre réseau. Cliquez sur Return to Profiles Screen (Revenir à l'écran Profils) pour ouvrir l'écran Profiles (Profils) de l'application Wireless Network Monitor.
Seite 69
Utilisation de Wireless Network All manuals and user guides at all-guides.com Une fois l'adaptateur configuré, l'icône Wireless Network Monitor apparaît dans la barre d'état système de votre ordinateur portable. Double-cliquez sur Icône Wireless l'icône pour ouvrir l'application Wireless Network Monitor Network Monitor.
Seite 71
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenuto della confezione • Adattatore PCI Wireless-G con RangeBooster • Due antenne • CD-ROM per l'installazione guidata • Guida per l'utente (solo in inglese) su CD-ROM •...
Seite 72
All manuals and user guides at all-guides.com Avvio dell'installazione Non inserire l'adattatore finché non viene richiesto. In caso contrario, IMPORTANTE l'installazione potrebbe non essere eseguita correttamente. L'adattatore viene installato e configurato mediante l'Installazione guidata inclusa nel CD-ROM. Per iniziare, inserire il CD-ROM per l'installazione guidata nell'apposita unità...
Seite 73
All manuals and user guides at all-guides.com Collegamento dell'adattatore Durante l'installazione dell'adattatore, seguire le linee guida riportate di IMPORTANTE seguito: Verificare di non essere carichi di elettricità statica. Se necessario, toccare il case • metallico del computer prima di installare l'adattatore. Non utilizzare un cacciavite magnetico.
Seite 74
Configurazione dell'adattatore All manuals and user guides at all-guides.com La schermata Available Wireless Network (Rete wireless disponibile) fornisce due opzioni per la configurazione dell'adattatore. • Available Wireless Network (Rete wireless disponibile). Questa opzione è adatta alla maggior parte degli utenti. Le reti disponibili per l'adattatore vengono elencate in questa schermata.
Seite 75
All manuals and user guides at all-guides.com la cifratura WEP (Wired IMPORTANTE Tutte le periferiche Equivalent Privacy), viene in rete devono utilizzare lo stesso visualizzata la schermata WEP metodo di protezione per Key Needed for Connection comunicare tra di loro. (Chiave WEP richiesta per la connessione).
Seite 76
All manuals and user guides at all-guides.com WPA-Personal Needed for Connection (WPA-Personal richiesta per la connessione) Selezionare il metodo di cifratura che si desidera utilizzare, quindi inserire una passphrase. Encryption (Cifratura) - Selezionare il tipo di algoritmo WPA-Personal da utilizzare: TKIP o AES. Passphrase - Immettere una passphrase (denominata anche chiave precondivisa)
Seite 77
All manuals and user guides at all-guides.com Configurazione dell'adattatore con la procedura di configurazione manuale Fare clic su Manual Setup (Configurazione manuale) nella schermata Available Wireless Network (Rete wireless disponibile) per configurare manualmente l'adattatore. Se la rete dispone di un router o di altro server DHCP , fare clic su Obtain network settings automatically (DHCP) (Ottieni...
Seite 78
All manuals and user guides at all-guides.com Selezionare la modalità wireless che si desidera utilizzare. Quindi, immettere l'identificativo SSID relativo alla rete in uso. Infrastructure Mode (Modalità infrastruttura) - Utilizzare questa modalità se l'adattatore verrà collegato a un router o a un punto di accesso wireless.
Seite 79
All manuals and user guides at all-guides.com Viene visualizzata la schermata Wireless Security (Protezione wireless). Se la rete wireless non utilizza alcuna protezione wireless, selezionare Disabled (Disattivata) e fare clic su Next (Avanti). Passare alla fase E. Selezionare il metodo di protezione che si desidera utilizzare: WEP , WPA Personal, PSK2, WPA Enterprise o RADIUS.
Seite 80
All manuals and user guides at all-guides.com Selezionare il livello di cifratura WEP che si desidera utilizzare, quindi immettere una passphrase o una chiave WEP . WEP - Selezionare 64-bit o 128-bit. Passphrase - Immettere una passphrase per generare automaticamente una chiave WEP .
Seite 81
All manuals and user guides at all-guides.com WPA Personal Selezionare un metodo di cifratura, quindi immettere una passphrase. Encryption (Cifratura) - Selezionare il tipo di algoritmo da utilizzare: TKIP o AES. Passphrase - Immettere una passphrase (denominata WPA Personal anche chiave precondivisa) di lunghezza compresa tra 8 e 63 caratteri.
Seite 82
All manuals and user guides at all-guides.com Dopo aver installato il software, viene visualizzata la schermata Congratulations (Congratulazioni). Fare clic su Connect to Network (Collega alla rete) per effettuare il collegamento alla rete. Fare clic su Return to Profiles (Torna ai profili) per aprire la schermata Profiles (Profili) del monitor di rete wireless.
Seite 83
Uso del monitor di rete wireless All manuals and user guides at all-guides.com Dopo aver completato la configurazione dell'adattatore, l'icona del monitor di rete wireless verrà visualizzata sulla barra delle Icona monitor applicazioni del notebook. Fare doppio clic sull'icona per aprire il monitor di rete wireless.
Seite 85
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Inhoud van de verpakking • Wireless-G PCI-adapter met RangeBooster • Twee antennes • Installatie-cd-rom • Gebruikershandleiding (alleen Engelstalig) op cd-rom • Aan de slag-gids 24 , Wireless-G 802.11g...
Seite 86
All manuals and user guides at all-guides.com Installatie starten Steek de adapter pas in de sleuf nadat u hiervoor de instructie krijgt, BELANGRIJK: want anders werkt de installatie niet. De adapter is geïnstalleerd. Voor de installatie wordt gebruikgemaakt van de installatiewizard op de installatie- cd-rom.
Seite 87
All manuals and user guides at all-guides.com Sluit de adapter aan Houd u bij de installatie van de adapter aan de volgende richtlijnen: BELANGRIJK: Zorg ervoor dat u niet statisch bent geladen. Raak indien nodig vóór installatie • van de adapter de metalen behuizing van uw computer aan. Gebruik geen magnetische schroevendraaier.
Seite 88
Adapter installeren All manuals and user guides at all-guides.com In het scherm Available Wireless Network (Beschikbaar draadloos werk) kunt u kiezen uit twee opties voor het installeren van de adapter. • Available Wireless Network (Beschikbaar draadloos netwerk). Deze optie is van toepassing op de meeste gebruikers.
Seite 89
All manuals and user guides at all-guides.com gebruik van WEP-codering (Wired Equivalent Privacy), dan wordt het Alle apparaten in BELANGRIJK: scherm WEP Key Needed for uw netwerk moeten dezelfde Connection (WEP-sleutel nodig beveiligingsmethode gebruiken voor verbinding) weergegeven. om met elkaar te kunnen Maakt uw netwerk gebruik van communiceren.
Seite 90
All manuals and user guides at all-guides.com WPA-Personal for Connection (WPA-Personal voor verbinding) Selecteer de coderingsmethode die u wilt gebruiken. Voer vervolgens een wachtzin in. Encryption (Codering) - Selecteer het algoritme dat u wilt gebruiken: TKIP of AES. WPA-Personal Passphrase (Wachtzin) - Voer een wachtzin in, ook wel 'vooraf (WPA - Persoonlijk) gedeelde sleutel' genoemd,...
Seite 91
All manuals and user guides at all-guides.com De adapter handmatig installeren Klik in het scherm Available Wireless Network (Beschikbaar draadloos netwerk) op Manual Setup (Handmatig installeren), als u de adapter handmatig wilt installeren. Heeft uw netwerk een router of een andere DHCP-server, klik dan op Obtain network settings automatically (DHCP) (Netwerkinstellingen...
Seite 92
All manuals and user guides at all-guides.com Selecteer de draadloze modus die u wilt gebruiken. Voer vervolgens de SSID in van uw netwerk. Infrastructure Mode (Infrastructuurmodus)- Gebruik deze modus als de adapter verbinding gaat maken met een draadloze router of een draadloos toegangspunt.
Seite 93
All manuals and user guides at all-guides.com Het scherm Wireless Security (Draadloze beveiliging) wordt weergegeven. Maakt uw draadloze netwerk geen gebruik van draadloze beveiliging, selecteer dan Disabled (Uitgeschakeld) en klik vervolgens op Next (Volgende). Ga verder met stap E. Selecteer de beveiligingsmethode die u wilt gebruiken: WEP , WPA Personal, Disabled...
Seite 94
All manuals and user guides at all-guides.com Selecteer voor WEP-codering het niveau dat u wilt gebruiken en voer vervolgens een wachtzin of een WEP-sleutel in WEP - Selecteer 64-bit (64-bits) of 128-bit (128-bits). Passphrase (Wachtzin) - Voer een wachtzin in. Vervolgens wordt automatisch een WEP- sleutel gegenereerd.
Seite 95
All manuals and user guides at all-guides.com WPA Personal (WPA - Persoonlijk) Selecteer een coderingsmethode en voer vervolgens een wachtzin in. Encryption (Codering) - Selecteer het algoritme dat u wilt gebruiken: TKIP of AES. WPA Personal Passphrase (Wachtzin) - Voer een wachtzin in, ook wel 'vooraf (WPA - Persoonlijk) gedeelde sleutel' genoemd,...
Seite 96
All manuals and user guides at all-guides.com Na installatie van de software wordt het scherm Congratulations (Gefeliciteerd) weergegeven. Klik op Connect to Network (Verbinding maken met netwerk) om verbinding te maken met uw netwerk. Klik op Return to Profiles screen (Terug naar het scherm Profielen) om het scherm Profiles (Profielen) op de netwerkmonitor te openen.
Seite 97
Gebruik de monitor van het All manuals and user guides at all-guides.com draadloze netwerk Na configuratie van de adapter is het pictogram van de monitor van het draadloze netwerk zichtbaar in de Monitorpictogram systeembalk. Dubbelklik op het pictogram om naar de monitor van het draadloze netwerk te gaan.
Seite 99
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Conteúdo da embalagem • Placa PCI sem fios G com RangeBooster • Duas antenas • CD-ROM de configuração • Manual do Utilizador (disponível apenas em inglês) no CD-ROM •...
Seite 100
All manuals and user guides at all-guides.com Iniciar a instalação Não introduza a Placa até receber instruções para o fazer, pois, caso IMPORTANTE: contrário, a configuração não funcionará. A Placa é instalada e configurada utilizando o Setup Wizard (Assistente de configuração) incluído no CD-ROM de configuração.
Seite 101
All manuals and user guides at all-guides.com Ligar a placa Durante a instalação da Placa, siga estas directrizes: IMPORTANTE: Certifique-se de que não tem electricidade estática. Se for necessário, toque na • caixa metálica do computador antes de instalar a Placa. Não utilize uma chave de parafusos magnética.
Seite 102
Configurar a placa All manuals and user guides at all-guides.com O ecrã Available Wireless Network (Rede sem fios disponível) fornece duas opções para configurar a Placa. • Available Wireless Network (Rede sem fios disponível). A maioria dos utilizadores deve utilizar esta opção. As redes disponíveis para esta Placa serão listadas neste ecrã.
Seite 103
All manuals and user guides at all-guides.com (Chave WEP necessária para Todos os IMPORTANTE: ligação). Se a rede utilizar dispositivos da rede têm de utilizar segurança WPA Personal, será o mesmo método de segurança apresentado o ecrã WPA- Personal Needed for para poderem comunicar entre si.
Seite 104
All manuals and user guides at all-guides.com WPA-Personal Needed for Connection (WPA-Personal necessária para ligação) Seleccione o método de encriptação que pretende utilizar. Em seguida, introduza uma frase-passe. Encryption (Encriptação) - Seleccione o tipo de algoritmo WPA-Personal que pretende utilizar, TKIP ou AES. Passphrase (Frase-passe) - Introduza uma frase-passe, também designada por...
Seite 105
All manuals and user guides at all-guides.com Configurar a placa com Manual Setup (Configuração manual) Clique em Manual Setup (Configuração manual) no ecrã Available Wireless Network (Rede sem fios disponível) para configurar a Placa manualmente. Se a rede tiver um router ou outro servidor DHCP , clique em Obtain network settings automatically (DHCP) (Obter definições da rede...
Seite 106
All manuals and user guides at all-guides.com Seleccione o modo sem fios que pretende utilizar. Em seguida, introduza o SSID da rede. Infrastructure Mode (Modo de infra-estrutura) - Utilize este modo se pretender ligar a Placa a um ponto de acesso ou router sem fios.
Seite 107
All manuals and user guides at all-guides.com Será apresentado o ecrã Wireless Security (Segurança sem fios). Se a rede sem fios não utilizar segurança sem fios, seleccione Disabled (Desactivado) e, em seguida, clique em Next (Seguinte). Avance para o Passo E. Seleccione o método de segurança que pretende utilizar: Disabled...
Seite 108
All manuals and user guides at all-guides.com Seleccione o nível de encriptação WEP que pretende utilizar e, em seguida, introduza uma frase-passe ou chave WEP . WEP - Seleccione 64-bit (64 bits) ou 128-bit (128 bits). Passphrase (Frase-passe) - Introduza uma frase-passe, para que seja gerada automaticamente uma chave WEP .
Seite 109
All manuals and user guides at all-guides.com WPA Personal Seleccione um método de encriptação e, em seguida, introduza uma frase-passe. Encryption (Encriptação) - Seleccione o tipo de algoritmo que pretende utilizar, TKIP ou AES. WPA Personal Passphrase (Frase-passe) - Introduza uma frase-passe, também designada por chave pré-partilhada, com 8 a 63 caracteres.
Seite 110
All manuals and user guides at all-guides.com Depois de o software ter sido instalado com êxito, será apresentado o ecrã Congratulations (Parabéns). Clique em Connect to Network (Ligar à rede) para estabelecer ligação à rede. Clique em Return to Profiles screen (Regressar ao ecrã...
Seite 111
Utilizar o Monitor de redes sem fios All manuals and user guides at all-guides.com Depois de configurar a Placa, o ícone do Monitor de redes sem fios será apresentado no tabuleiro do sistema do computador. Faça Ícone do Monitor duplo clique no ícone para abrir o Monitor de redes sem fios.
Seite 113
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Innehåll i förpackningen • Wireless-G PCI-adapter med RangeBooster • Två antenner • Installations-cd • Användarhandbok (endast engelska) på cd-skiva • Snabbinstallation 24 , Wireless-G 802.11g PCI-adapter med RangeBooster...
Seite 114
All manuals and user guides at all-guides.com Börja med installationen Sätt inte i adaptern innan en uppmaning visas om att du ska göra det, VIKTIGT! annars fungerar inte installationen. Installera och konfigurera adaptern med hjälp av installationsguiden som finns med på installations-cd:n. Börja med att sätta in cd-skivan med installationsguiden i datorns...
Seite 115
All manuals and user guides at all-guides.com Anslut adaptern Följ anvisningarna nedan när du installerar adaptern: VIKTIGT! Kontrollera att du inte är laddad med statisk elektricitet. Om du behöver kan du • vidröra en metalldel i datorns hölje innan du installerar adaptern. Använd inte en magnetisk skruvmejsel.
Seite 116
Konfigurera adaptern All manuals and user guides at all-guides.com I fönstret Available Wireless Network (Tillgängliga trådlösa nätverk) får du två olika alternativ för konfiguration av adaptern. • Available Wireless Network (Tillgängliga trådlösa nätverk). De flesta användare bör välja det här alternativet. De nätverk som är tillgängliga för den här adaptern visas i det här fönstret.
Seite 117
All manuals and user guides at all-guides.com Equivalent Privacy) används i Alla enheter i nätverket VIKTIGT! nätverket visas fönstret WEP Key måste använda samma Needed for Connection (WEP- säkerhetsmetod för att kunna nyckel krävs för anslutning). kommunicera med varandra. Om säkerhetsmetoden WPA Personal (WPA –...
Seite 118
All manuals and user guides at all-guides.com WPA-Personal for Connection (WPA – privat för anslutning) Välj den krypteringsmetod du vill använda: Ange sedan ett lösenord. Encryption (Kryptering): Välj typ av algoritm som du vill använda, TKIP eller AES. WPA-Personal Passphrase (Lösenord): Ange (WPA –...
Seite 119
All manuals and user guides at all-guides.com Ställa in adaptern med manuell konfiguration Klicka på Manual Setup (Manuell konfiguration) i fönstret Available Wireless Network (Tillgängliga trådlösa nätverk) för manuell konfigurering av adaptern. Om nätverket har en router eller annan DHCP-server klickar du på...
Seite 120
All manuals and user guides at all-guides.com Välj det trådlösa läge du vill använda. Ange sedan ditt nätverks SSID. Infrastructure Mode (Infrastrukturläge): Använd det här läget för anslutning till en trådlös router eller accesspunkt. Ad-Hoc Mode (Ad-hoc-läge): Använd det här läget om adaptern kommer att ansluta direkt till en annan trådlös enhet.
Seite 121
All manuals and user guides at all-guides.com Fönstret Wireless Security (Trådlös säkerhet) visas. Om ditt trådlösa nätverk inte använder trådlös säkerhet väljer du Disabled (Avaktiverad) och klickar på Next (Nästa). Fortsätt till steg E. Välj vilken säkerhetsmetod du vill använda: WEP , WPA Personal (WPA –...
Seite 122
All manuals and user guides at all-guides.com Välj vilken nivå på WEP- kryptering som ska användas och ange sedan ett lösenord eller WEP-nyckel WEP: Välj 64-bit (64-bitars) eller 128-bit (128-bitars). Passphrase (Lösenord): Ange ett lösenord så genereras en WEP-nyckel automatiskt. Lösenordsfrasen är skiftlägeskänslig och får inte bestå...
Seite 123
All manuals and user guides at all-guides.com WPA Personal (WPA – privat) Välj en krypteringsmetod och ange sedan ett lösenord. Encryption (Kryptering): Välj typ av algoritm som du vill använda, TKIP eller AES. Passphrase (Lösenord): Ange WPA Personal ett lösenord, även kallat (WPA –...
Seite 124
All manuals and user guides at all-guides.com När programvaran har installerats visas skärmen Congratulations (Klart). Klicka på Connect to Network (Anslut till nätverket) när du vill ansluta till nätverket. Klicka på Return to Profiles screen (Tillbaka till fönstret Profiler) så öppnas fönstret Profiles (Profiler) i Wireless Network Monitor.
Seite 125
Använda Wireless Network Monitor All manuals and user guides at all-guides.com När adaptern har konfigurerats visas ikonen för Wireless Network Monitor i systemfältet i den bärbara datorn. Ikon för Om du dubbelklickar på ikonen öppnas Wireless Network Monitor. övervakaren Använd Wireless Network Monitor till att kontrollera länkinformationen, söka efter tillgängliga trådlösa nätverk (klicka på...