Troubleshooting; Environmental Protection - Lightmaxx VECTOR BSW 10R MKII Bedienungsanleitung

Troubleshooting:

Note! (Error during data transmission)
Never connect the DMX input or output to audio devices!
DMX cables enable trouble-free operation and the highest possible trans-
mission reliability of signal data. Do not use microphone cables.
The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
Symptom
No function
No reaction in DMX mode
If the specified corrections have not been successful, please contact our service staff. The contact
details can be found at www.musicstore.de.
Cleaning:
A regular cleaning of the device from impurities and dust increases the durability of the product.
Always disconnect the device from the power supply before cleaning it! Never clean the appliance
wet! Optical lenses should be cleaned with a dry microfiber cloth to optimize light output.
Ventilation grilles and openings should always be cleaned of dust and dirt. Suitable compressed
air sprays are recommended for this application.

Environmental protection:

The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging
to a minimum. The use of environmentally friendly and recyclable materials is of fundamental
importance to us. Please recycle the packaging components after use.
Troubleshooting
Check the mains connection and its fuse.
Check the cable connections.
If available, try an alternative DMX controller.
33