Display Settings; Test Mode; Device Status - Lightmaxx VECTOR BSW 10R MKII Bedienungsanleitung

Display settings:

1. Language:
2. Screen Saver:
Modus 1: Display turns off when it is not needed
Modus 2: Display shows the DMX address (in DMX mode) or the selected mode
Off:
3. Screen Rotation: Under this menu subsection the display can be rotated (overhead mounting,
4. Touch enable:
5. Touch Adjust:

Test mode

PAN:
Range 0 - 255
Tilt: Range 0 - 255
Focus: Range 0 - 255
Color:
Range 0 - 255
Adjust the spotlight parameters:
Pan Invert:
Tilt Invert:
Rectify enable:
Pan Offset:
Tilt Offset:
Lamp on when:
Factory Setting:

Device status:

Under this menu subsection you can see the currently installed software as well as reset the DMX
data to ‚0' (DMXClr) and reset the device (SysRst).
24
This menu subsection allows you to select the language between Chinese
and English.
If the display is not used for more than 10 seconds, it switches to Saver mode.
(Auto Run or Sound Ctrl).
Display light remains on, display shows the main menu.
standing installation)
Under this menu subsection, the touch function of the display can be
activated and deactivated.
The touch screen can be adjusted under this menu sebsection.
Invert the PAN movement
Invert the TILT movement
Enables or disables automatic position correction
Moves the spotlight to the PAN home position
Sets the spotlight to the TILT home position
The „Lamp On" mode includes 3 modes: Power on, after reset and manual
All settings are reset to the factory settings
Gobo:
Range 0 - 255
Prism: Range 0 - 255
Frost: Range 0 - 255
Strobe:
Range 0 - 255