Cisco Systems Linksys WAG354G Schnellinstallations-Anleitung Seite 7

e
Enter the DNS in the Primary
and/or Secondary fields. You
need to enter at least one DNS
address.
f
Click the Save Settings button
to save the settings.
2 RFC 2516 PPPoE or RFC 2364
PPPoA
If your ISP says that you are
connecting through PPPoE (Figure
D3) or PPPoA (Figure D4), or if you
normally enter a user name and
password to access the Internet,
perform these steps:
a
Select PPPoE or PPPoA as
appropriate for the
Encapsulation.
b
If you selected PPPoE, enter
the Service Name (if required).
c
Enter the User Name.
d
Enter the Password.
e
Select Keep Alive if you always
want to be connected to your
ISP , or select Connect on
Demand if you are charged
for the time that you are
connected to your ISP .
f
Click the Save Settings button
to save the settings.
All manuals and user guides at all-guides.com
D
3 PPPoE
D
PPPoA
4
7