Inhaltszusammenfassung für Cisco Systems Linksys WAG354G
Seite 1
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Package Contents • Wireless-G ADSL Home Gateway • User Guide on CD-ROM • Ethernet Network Cable • Phone Cable • Power Adapter • Microfilter or splitter (not supplied with all models) •...
Seite 2
All manuals and user guides at all-guides.com Connect the ADSL Home Gateway In Step 1, you will connect the Gateway to your ADSL line and to the computers in your home or business. First, make sure that all the devices that you’ll be working with are powered down, including your PCs and the Gateway.
Seite 3
All manuals and user guides at all-guides.com Repeat this process for every PC that you want to connect to the Gateway. If you are connecting more than four PCs to the Gateway, you will also need to connect a hub or switch to the Gateway.
Seite 4
All manuals and user guides at all-guides.com Configure the ADSL Home Gateway In Step 2, you will configure your Linksys Wireless-G ADSL Home Gateway to be able to gain access to the Internet through your Internet Service Provider (ISP). You will need the setup information provided by your ADSL ISP .
Seite 5
All manuals and user guides at all-guides.com in lowercase letters in the Password field (admin is the default user name and password.) Then, click the OK button. The Basic Setup screen will appear with the Setup tab selected. (Figure C) Based on the setup instructions from your ISP , you may need to provide the following information.
Seite 6
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Dynamic IP Address If your ISP says that you are connecting through a dynamic IP address (Figure D1), perform these steps: Select RFC 1483 Bridged for the Encapsulation. Dynamic Select Obtain an IP Address Automatically for the IP Set- ting.
Seite 7
All manuals and user guides at all-guides.com Enter the DNS in the Primary and/or Secondary fields. You need to enter at least one DNS address. Click the Save Settings button to save the settings. 2 RFC 2516 PPPoE or RFC 2364 PPPoA If your ISP says that you are connecting through PPPoE (Figure...
Seite 9
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Pakkens indhold • Trådløs-G ADSL-gateway til hjemmet • Brugervejledning på cd-rom • Ethernet-kabel • Telefonledning • Strømforsyning • Mikrofilter eller fordeler (følger ikke med alle modeller) •...
Seite 10
All manuals and user guides at all-guides.com Tilslutning af ADSL-gatewayen I trin 1 tilslutter du gatewayen til ADSL-linjen og til computerne i dit hjem/din virksomhed. Kontroller først, at alle de involverede enheder er slukket, herunder dine pc'er og gatewayen. Tilslut den ene ende af den medfølgende telefonledning til ADSL-vægstikket.
Seite 11
All manuals and user guides at all-guides.com Hvis du tilslutter mere end fire pc'er til gatewayen, skal du også tilslutte en hub eller switch til gatewayen. BEMÆRK: Hvis pc'ens Ethernet- adapter ikke er konfigureret, skal du se brugervejledningen til Ethernet-adapteren for at få...
Seite 12
All manuals and user guides at all-guides.com Konfiguration af ADSL-gatewayen I trin 2 konfigurerer du Linksys Trådløs-G ADSL-gatewayen, så du kan oprette adgang til internettet via din internetudbyder. Du skal have konfigurationsoplysningerne af din ADSL-udbyder. Hvis du ikke har disse oplysninger, skal du kontakte udbyderen, før du fortsætter.
Seite 13
All manuals and user guides at all-guides.com admin med små bogstaver i feltet Password (Adgangskode) (admin er standardbrugernavnet og -adgangskoden.) Klik derefter på knappen OK. Skærmbilledet Basic Setup vises med fanen Setup valgt. (Figur C) Afhængigt af konfigurationsvejledningen fra din internetudbyder skal du muligvis angive følgende oplysninger.
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Dynamisk IP-adresse Hvis din internetudbyder har oplyst, at du opretter forbindelse via en dynamisk IP-adresse (Figur D1), skal du følge nedenstående fremgangsmåde: Vælg RFC 1483 Bridged som indkapslingsmetode. Dynamisk Vælg Obtain an IP Address Automatically som IP-indstilling.
Seite 15
All manuals and user guides at all-guides.com Indtast DNS-adressen i feltet Primary og/eller Secondary. Du skal indtaste mindst én DNS-adresse. Klik på knappen Save Settings for at gemme indstillingerne. 2 RFC 2516 PPPoE eller RFC 2364 PPPoA Hvis din internetudbyder har oplyst, at du opretter forbindelse via PPPoE (Figur D3) eller PPPoA (Figur D4), eller hvis du normalt indtaster et brugernavn og en...
Seite 17
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Lieferumfang • Wireless-G ADSL-Home-Gateway • Benutzerhandbuch auf CD-ROM • Ethernet-Netzwerkkabel • Telefonkabel • Netzstromadapter • Mikrofilter (nicht im Lieferumfang aller Modellnummern enthalten) • Kurzanleitung Wireless-G 802.11g...
All manuals and user guides at all-guides.com Anschließen des ADSL-Gateways In Schritt 1 schließen Sie das Gateway an Ihre ADSL-Verbindung und die Computer in Ihrer Heim- oder Unternehmensumgebung an. Überprüfen Sie zuerst, ob alle Geräte, mit denen Sie arbeiten (einschließlich PCs und Gateway), ausgeschaltet sind.
Seite 19
All manuals and user guides at all-guides.com Wenn mehr als vier PCs an das Gateway angeschlossen werden sollen, müssen Sie außerdem einen Hub oder Switch an das Gateway anschließen. HINWEIS: Wenn der Ethernet- Adapter des Computers nicht eingerichtet ist, finden Sie dazu weitere Informationen im Benutzerhandbuch zum Ethernet-Adapter.
All manuals and user guides at all-guides.com Konfigurieren des ADSL-Gateways In Schritt 2 konfigurieren Sie das Linksys Wireless-G ADSL-Home-Gateway für den Zugriff auf das Internet über Ihren ISP . Sie benötigen hierzu die Setup- Informationen Ihres ADSL-ISPs. Wenn Sie nicht über diese Informationen verfügen, wenden Sie sich an Ihren ISP , bevor Sie beginnen.
Seite 21
All manuals and user guides at all-guides.com Das Fenster Basic Setup (Grundlegende Einrichtung) wird mit ausgewählter Registerkarte Setup angezeigt (Abbildung C). Je nach den Setup-Informationen von Ihrem ISP müssen Sie unter Umständen die folgenden Informationen eingeben: Virtual Circuit (Virtueller Kreis): Für diese Option sind zwei Einstellungen erforderlich, VPI (Virtual Path Identifier;...
Seite 22
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (RFC 1483- Überbrückung) Dynamische IP Adresse Wenn Sie laut ISP über eine dynamische IP- Adresse verbunden sind (Abbildung D1), führen Sie die folgenden Schritte aus: Wählen Sie als Kapselungsmethode RFC 1483 Bridged (RFC 1483- Überbrückung) aus.
Seite 23
All manuals and user guides at all-guides.com Geben Sie die DNS-Adressen in die Felder Primary DNS (Primärer DNS) und Secondary DNS (Sekundärer DNS) ein. Sie müssen mindestens eine DNS-Adresse eingeben. Klicken Sie auf die Schaltfläche Save Settings (Einstellungen speichern), um die Einstellungen zu speichern.
Seite 25
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenido del paquete • Puerta de enlace doméstica ADSL Wireless-G • Guía del usuario en CD-ROM • Cable de red Ethernet • Cable telefónico • Adaptador de corriente •...
Seite 26
All manuals and user guides at all-guides.com Conecte la puerta de enlace ADSL En el paso 1, debe conectar la puerta de enlace a la línea ADSL y a los ordenadores de casa o de la oficina. En primer lugar, asegúrese de que todos los dispositivos con los que va a trabajar están apagados, incluyendo los PC y la puerta de enlace.
Seite 27
All manuals and user guides at all-guides.com Si va a conectar más de cuatro PC a la puerta de enlace, también deberá conectar un concentrador o conmutador a la misma. NOTA: Si el adaptador Ethernet del ordenador no está configurado, consulte la guía del usuario del mismo para obtener más información.
Seite 28
All manuals and user guides at all-guides.com Configure la puerta de enlace ADSL En el paso 2, debe configurar la puerta de enlace doméstica ADSL Wireless-G de Linksys para poder acceder a Internet mediante un proveedor de servicios de Internet (ISP).
Seite 29
All manuals and user guides at all-guides.com Nombre de usuario y de nuevo en el campo Contraseña (admin es el nombre de usuario y la contraseña predeterminados). A continuación, haga clic en el botón Aceptar. Aparece la pantalla Basic Setup (Configuración básica) con la ficha Setup (Configurar) seleccionada.
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (RFC 1483 con puente) Dynamic IP Address (Dirección IP dinámica) Si el ISP indica que su conexión se realiza mediante una dirección IP dinámica (figura D1), siga estos pasos: En Encapsulation (Encapsulación), seleccione RFC 1483 Bridged (RFC 1483 con...
Seite 31
All manuals and user guides at all-guides.com Introduzca la dirección de la puerta de enlace predeterminada (Default Gateway). Introduzca la dirección DNS en los campos correspondientes a las direcciones DNS principal (Primary) y secundaria (Secondary). Debe introducir por lo menos una dirección DNS. Haga clic en el botón Save Settings (Guardar parámetros) para guardar los parámetros.
Seite 33
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenuto della confezione • Home Gateway ADSL Wireless-G • User Guide (Guida per l'utente) su CD-ROM • Cavo di rete Ethernet • Cavo telefonico • Adattatore di corrente •...
Seite 34
All manuals and user guides at all-guides.com Collegamento del gateway ADSL Nella fase 1 il gateway viene collegato alla linea ADSL e ai computer di casa o dell'ufficio. Per prima cosa, verificare che tutti i dispositivi da utilizzare siano spenti, compresi i PC e il gateway.
Seite 35
All manuals and user guides at all-guides.com Se si collegano più di quattro PC al gateway, occorre collegare anche un hub o uno switch al gateway. NOTA Se l'adattatore Ethernet del PC non è configurato, consultare la relativa documentazione per istruzioni.
Seite 36
All manuals and user guides at all-guides.com Configurazione del gateway ADSL Nella fase 2 viene configurato il Home Gateway ADSL Wireless-G di Linksys in modo che sia in grado di accedere a Internet attraverso il provider di servizi in uso. È necessario disporre delle informazioni sulla configurazione fornite dal provider di servizi Internet ADSL.
Seite 37
All manuals and user guides at all-guides.com Name (Nome utente) e Password (admin È il nome utente e la password predefinita). Quindi, fare clic sul pulsante OK. Viene visualizzata la schermata Basic Setup (Configurazione di base) in cui è selezionata la scheda Setup (Configurazione) (Figura C).
Seite 38
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (Bridging RFC 1483) Indirizzo IP dinamico Se il provider di servizi Internet fornisce una connessione tramite un indirizzo IP dinamico (Figura D1), attenersi alla seguente procedura: Selezionare RFC 1483 Bridged (Bridging RFC 1483) per l'incapsulamento.
Seite 39
All manuals and user guides at all-guides.com Immettere gli indirizzi DNS nei campi Primary DNS (DNS primario) e Secondary DNS (DNS secondario). È necessario specificare almeno un indirizzo DNS. Fare clic sul pulsante Save Settings (Salva impostazioni) per salvare le impostazioni. 2 RFC 2516 PPPoE o RFC 2364 PPPoA Se il provider di servizi Internet fornisce...
Seite 41
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Conteúdo da embalagem • Gateway ADSL doméstico sem fios G • Manual do Utilizador em CD-ROM • Cabo de rede Ethernet • Cabo telefónico • Transformador •...
Seite 42
All manuals and user guides at all-guides.com Ligar o Gateway ADSL No Passo 1, ligará o Gateway à linha ADSL e aos computadores em casa ou na empresa. Primeiro, certifique-se de que todos os dispositivos com que irá trabalhar estão desligados, incluindo os computadores e o Gateway.
Seite 43
All manuals and user guides at all-guides.com Se estiver a ligar mais de quatro computadores ao Gateway, também será necessário ligar um concentrador ou comutador ao Gateway. NOTA: Se a placa Ethernet do computador não estiver configurada, consulte o manual do utilizador da placa Ethernet para obter mais informações.
Seite 44
All manuals and user guides at all-guides.com Configurar o Gateway ADSL No Passo 2, configurará o Gateway ADSL doméstico sem fios G da Linksys para conseguir aceder à Internet através do Fornecedor de serviços Internet (ISP). Necessitará das informações de configuração fornecidas pelo ISP do serviço de ADSL.
Seite 45
All manuals and user guides at all-guides.com em minúsculas no campo User Name (Nome de utilizador) e introduza admin em minúsculas no campo Password (Palavra-passe) (admin é o nome de utilizador e palavra-passe predefinidos). Em seguida, clique no botão OK. Será...
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Endereço IP dinâmico Se o ISP indicar que está a estabelecer ligação através de um endereço IP dinâmico (Figura D1), execute os seguintes passos: Seleccione RFC 1483 Bridged como Encapsulation (Encapsulamento).
Seite 47
All manuals and user guides at all-guides.com Introduza o Default Gateway address (Endereço predefinido do gateway). Introduza o DNS nos campos Primary (Primário) e/ou Secondary (Secundário). É necessário introduzir pelo menos um endereço de DNS. Clique no botão Save Settings (Guardar definições) para guardar as definições.
Seite 49
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Innehåll i förpackningen • Wireless-G ADSL-gateway för hemmet • Användarhandbok på cd-skiva • Ethernet-nätverkskabel • Telefonkabel • Strömadapter • Mikrofilter eller signaldelare (medföljer inte alla modeller) •...
Seite 50
All manuals and user guides at all-guides.com Ansluta ADSL-gatewayen I steg 1 ansluter du gatewayen till ADSL-linjen och till datorerna hemma eller på jobbet. Börja med att kontrollera att alla aktuella enheter är avstängda, inklusive dator och gateway. Anslut den ena änden av medföljande telefonkabel till det vägguttag där ADSL-tjänsten installerats.
Seite 51
All manuals and user guides at all-guides.com Om du ansluter fler än fyra datorer måste du också ansluta en hub eller switch till gatewayen. OBS! Om datorns Ethernet- adapter inte har konfigurerats finns mer information om hur du går tillväga i användarhandboken till Ethernet-adaptern.
Seite 52
All manuals and user guides at all-guides.com Konfigurera ADSL-gatewayen I steg 2 konfigurerar du Linksys Wireless- G ADSL-gateway för hemmet så att du får åtkomst till Internet genom din Internet-leverantör. Du behöver inställningsinformationen från din ADSL-leverantör. Om du inte har tillgång till denna information bör du kontakta leverantören innan du fortsätter.
Seite 53
All manuals and user guides at all-guides.com Lösenord. (admin är det standardinställda användarnamnet och lösenordet.) Klicka på OK. Skärmen Basic Setup (Grundläggande inställningar) visas med fliken Setup (Inställningar) vald (bild C). Beroende på inställningsanvisningarna från Internet-leverantören kan du behöva uppge följande information: Virtual Circuit (VPI och VCI) (Virtuell krets): Dessa fält består...
Seite 54
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (Bryggkopplad) Dynamisk IP-adress Om Internet-leverantören anger att du ska ansluta till Internet via en dynamisk IP-adress (bild D1) ska du följa dessa steg: Välj RFC 1483 Bridged (Bryggkopplad) vid Encapsulation (Inkapsling).
Seite 55
All manuals and user guides at all-guides.com Skriv DNS-adressen i fältet Primary (Primär) eller Secondary (Sekundär). Du måste ange minst en DNS-adress. Spara inställningarna genom att klicka på Save Settings (Spara inställningar). 2 RFC 2516 PPPoE eller RFC 2364 PPPoA Om Internet-leverantören anger att du ska ansluta till Internet via PPPoE (bild D3) eller PPPoA (bild D4), eller om du...
Seite 57
All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenu de l'emballage • Modem routeur ADSL résidentiel sans fil G • Guide de l'utilisateur sur CD-ROM • Câble réseau Ethernet • Câble téléphonique • Adaptateur d'alimentation •...
Seite 58
All manuals and user guides at all-guides.com Connexion du modem routeur ADSL L'étape 1 consiste à connecter le modem routeur à votre ligne ADSL ainsi qu'aux ordinateurs installés à domicile ou sur votre lieu de travail. Assurez-vous d'abord de la mise hors tension de tous les périphériques que vous allez utiliser, ordinateurs et passerelle inclus.
Seite 59
All manuals and user guides at all-guides.com Si vous raccordez plus de quatre ordinateurs au modem routeur, vous devrez également raccorder un concentrateur ou un commutateur au modem routeur. REMARQUE : Si la carte Ethernet de votre ordinateur n'est pas configurée, reportez-vous au guide de l'utilisateur de...
Seite 60
All manuals and user guides at all-guides.com Configuration du modem routeur ADSL A l'étape 2, vous configurerez votre modem routeur ADSL sans fil G Linksys afin qu'il puisse accéder à l'Internet par l'intermédiaire de votre Fournisseur d'accès Internet (FAI). Vous devrez avoir à votre disposition les informations de configuration fournies par votre FAI.
Seite 61
All manuals and user guides at all-guides.com User Name (Nom d'utilisateur) , puis admin en minuscules Password (Mot dans le champ de passe) (admin correspond aux nom d'utilisateur et mot de passe par défaut). Cliquez sur le bouton OK. Basic Setup L'écran (Configuration de base) apparaîtra en affichant son...
Seite 62
All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Adresse IP dynamique Si votre FAI vous indique que vous vous connectez par l'intermédiaire d'une adresse IP dynamique (Figure D1), exécutez la procédure ci-après : Sélectionnez RFC 1483 Bridged pour l'encapsulation. Sélectionnez Obtain an IP Address Automatically Dynamique...
Seite 63
All manuals and user guides at all-guides.com secondaire) . Vous devez entrer au moins une adresse DNS. Cliquez sur le bouton Save Settings (Enregistrer paramètres) pour enregistrer les modifications apportées aux paramètres. 2 RFC 2516 PPPoE ou RFC 2364 PPPoA Si votre FAI vous indique que vous vous connectez par le biais du protocole PPPoE (Figure D3) ou...