Cisco Systems Linksys WAG354G Schnellinstallations-Anleitung Seite 2

1
Connect the ADSL Home Gateway
In Step 1, you will connect the
Gateway to your ADSL line and to
the computers in your home or
business.
First, make sure that all the devices
that you'll be working with are
powered down, including your PCs
and the Gateway.
A
Connect one end of the
provided phone cable to the
wall jack with ADSL service.
NOTE: To avoid interference,
you may need to place
a microfilter or splitter
between the phone
cable and wall jack.
Contact your service
provider for more
information. (If you use
ISDN, then you do not
need a microfilter.)
B
Connect the other end of the
phone cable to the LINE port
that is on the back of the
Gateway. (Figure B)
C
Connect one end of the
provided Ethernet cable to
your PC's Ethernet adapter
(Figure C1). Connect the other
end of the cable to one of the
Ethernet ports on the back of
the Gateway (Figure C2).
2
All manuals and user guides at all-guides.com
B
C
1
C
2