Troubleshooting; Warranty - Dometic SMP301-11 Montage- Und Bedienungsanleitung

Troubleshooting

10 Troubleshooting
Fault Cause
Output is not The plug-in fuse of the output is defec-
tive. The red LED (fig. 4 1, page 4) is
supplied.
lit.
The switch-mode power supply has
switched off as a result of the surge
protector. The red LED (fig. 4 1,
page 4) is lit.
The switch-mode power supply is
managed via the CI-bus and the
output is deactivated.
The switch-mode power supply is
managed via an external switching
voltage and the output is deactivated.
Please contact the manufacturer's branch in your country (see the back of the instruc-
tion manual for the addresses) or your retailer if the function cannot be restored by
switching on the fuses or replacing the plug-in fuse.
11

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see back page) or your retailer.
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
14
Repair
Replace the plug-in fuse with a
plug-in fuse of equivalent value.
The surge protector resets auto-
matically as soon as the voltage
returns to a permissible value.
Otherwise, contact customer
service.
Switch the switch-mode power
supply on using the connected
control unit or change the
switching mode (chapter
"Changing switching mode" on
page 11).
SMP301-11
EN