Renkforce FS5022J Bedienungsanleitung Seite 2

Operating instructions
2D Barcode scanner
Item no. 1897136
Intended use
The product is suitable for reading common barcodes, such as UPC or EAN, fast and reliable. You can insert
the scanned codes straight into documents and forms on the connected computer. The barcode scanner is
ideal for shop, warehouse or office use.
It is only suitable for use in enclosed spaces. Outdoor use is not permitted. Contact with humidity; e.g., in
bathrooms, must be avoided at all times.
For safety and compliance reasons, the product must not be converted or modified in any way. If you use the
product for other purposes than those described above, the product may be damaged. Moreover, improper
use involves risks such as short-circuits, fire, electric shocks, etc. Please read the operating instructions
carefully and do not discard them. Please include these operating instructions when you pass the product
on to a third party.
This product complies with the applicable national and European Regulations. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package contents
• 2D barcode scanner with USB cable
• Stand
• Screw
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in these operating instructions
that must be adhered to.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention to the safety
instructions. We do not assume liability for any injuries/material damages resulting
from failure to observe the safety instructions and the information in these operating
instructions regarding the proper use of the product. Furthermore, in such cases, the
warranty/guarantee will be null and void.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave the packaging material lying around. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations, high humi-
dity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure it against
unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of time or
- has been exposed to considerable strain during transport.
• Please handle the product with care. The product can be damaged if crushed, struck or drop-
ped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are connected
to this product.
• Never use the product immediately after moving it from a cold room into a warm one. The
condensation that forms may damage the product under certain circumstances. Allow the
product to reach room temperature before connecting it to the power supply and putting it into
use. In some cases, this may take several hours.
• Attention, LED light: Do not look directly into the LED light! Do not look directly or with optical
instruments into the light!
• If you have doubts about how the product should be operated or how to safely connect it,
consult a qualified technician.
• Maintenance, adjustment and repair work should only be carried out by an expert or a spe-
cialised workshop.
• If you have any questions that are not answered in these operating instructions, please con-
tact our technical customer service or other professionals
Assembling the stand
• Place the toothed lock washer on the screw.
• Align one of the two openings on the arm of the stand with the screw hole on the side of the barcode
scanner.
• Fasten the barcode scanner to the stand using the provided screw. Turn the screw clockwise to fasten.
All manuals and user guides at all-guides.com
• Toothed lock washer
• Quick guide
• Operating instructions
Getting started
• Switch on your computer and wait until the operating system has booted completely.
• Connect the barcode scanner via the provided USB cable with a USB port in your computer. The barcode
scanner will then beep.
• The computer will detect the new hardware and install the required drivers. Those are integrated into the
operating system (basically, the barcode scanner works like a USB keyboard).
• Open the document on your computer where you want the barcode to be recorded. The bar code data
(for example, an EAN number combination) will be inserted where the cursor is blinking (for example, a
field in a spreadsheet).
• Position the reading unit at the front of the barcode scanner at an adequate distance and at a slight angle
to the barcode. Depending on the size and specification of the barcode, you may need to adjust the space
between reader and barcode individually.
• The Fixed-mount barcode scanner has auto-sensing function. When you put barcode in front of scanner, it
will feel the change of outside brightness and activate its scanning light automatically. (the round-dot aimer
is on the barcode & the red illuminated area should be more above the barcode). If the reading process is
successful, you will hear a beep sound & LED will flash briefly in green. The barcode is converted into the
corresponding characters and transmitted to the computer.
Settings
A sheet with barcodes is included. You can use those to adjust the barcode scanner to your scope of appli-
cation. To configure the barcode scanner simply scan the respective barcode.
The barcode scanner can be reset to the default settings by scanning a special barcode, if necessary.
Tips & hints
• The characters read by the barcode scanner are transmitted to the computer the same way like a con-
ventional keyboard. Thus, the cursor should be set to the position where you want to have the characters
inserted, before starting a scan.
• Make sure that the barcode to be read is clear. The barcode to be read should be fully visible and not
damaged.
• The distance between the barcode and the reader is chosen depending on the size of the barcode. The
smaller the barcode, the closer the reader needs to be to the barcode.
Care and cleaning
• Disconnect the product from the mains supply before each cleaning procedure.
• Use a dry, lint-free cloth to clean the product.
• Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these could dama-
ge the casing or even impair operation.
Disposal
Electronic devices are recyclable materials and do not belong in the household waste. Dispose
of an unserviceable product in accordance with the relevant statutory regulations. That way you
fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage .................................5 V/DC via USB
Power consumption ..............................max. 460 mA
Auto sensing .........................................approx. 200 mm
Readable barcodes .............................. 1D: UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13, ISBN (Bookland
EAN), Code-128, UCC/EAN-128, ISBT-128, Code-39, Code-39 Full
ASCII, Trioptic Code-39, Code-32 (Italian Pharma Code), Code-93,
Code-11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Matrix
2 of 5, Codabar, MSI, GS1 DataBar (RSS)
2D: PDF 417, MicroPDF417, Datamatrix, QR Code, Micro QR
Code, Aztec, Composite, TLC-39, MaxiCode Postal: US PostNet,
US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal
(KIX)
Reading angle ......................................Roll 360° / pitch ± 60° / skew ± 60°
Best resolution: .....................................1D (4 mil):Code 39, 2D (10 mil):DataMatrix
Depth of field ........................................1D (100 % UPC-A ):430 mm, 2D (15mil PDF417):380 mm
Print contrast ........................................≥ 25 %
Indicators ..............................................LED & Beeper
Interface ................................................USB HID
Depth of focus ...................................... 65 - 150 mm (4 mil / Code 39), 46 - 195 mm (5 mil / Code 39)
38 - 260 mm (10 mil / PDF 417), 60 - 380 mm (15 mil / PDF 417)
45 - 170 mm (10 mil / QR code), 48 - 155 mm (15 mil / QR code)
50 - 220 mm (10 mil / Data Matrix), 40 - 305 mm (15 mil / Data
Matrix)
Light source ..........................................617 nm, dot optical power: 0.19 mW typical
Scanning speed ....................................60 frames/s
Sensor ..................................................CMOS (752 x 480 pixels)
Ambient light: ........................................max. 96900 Lux. (direct sunlight)
Operating system .................................Windows 2000 / XP or higher
Operating temperature/ humidity .......... 0 °C to +50 ºC, 5% to 95% rH (non-condensing)
Storage temperature/ humidity ............. -10 °C to +60 ºC, 5% to 95% rH (non-condensing)
Dimensions ...........................................600 x 540 x 300 mm (L x W x H)
Weight ..................................................approx. 150 g (without stand)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2019 by Conrad Electronic SE. 1897136_v1_0119_02_dh_m_en