Elmo QBIC MS-1 Kurzanleitung Seite 31

All manuals and user guides at all-guides.com
●Do not clean this product with strong solvents, such as thinner
and benzene; they could cause this product to malfunction.
●Use a dry soft cloth to clean the product.
●When a liquid such as detergent, liquid soap, bath agent, hot
spring or tanning oil is dropped on the product, immediately
wipe with a dry soft cloth.
■Luminescent spot and black spot
●This product uses a CMOS area image sensor composed of
numerous pixels, and some of the pixels may not operate
normally. Therefore, luminescent spots or black spots could be
witnessed on the output screen. This is not a defect but a
phenomenon peculiar to the CMOS area image sensor.
■Image data
●This product is composed of precision electronic parts and
components. If this product is handled as follows, the internal
data of the micro SD card could be destroyed:
- The micro SD card is dislodged, or power is turned off while
this product is in operation.
-The supplied USB cable comes out during communication.
●Under those circumstances, ELMO shall not be liable for any
damages due to corruption of or loss of the recorded data.
■ About the micro SD card
● When using the micro SD card, format it with this product
before starting to use. Do not use any other device to format.
Some micro SD cards may not be used.
Make sure to transfer the important data to other storage
devices such as a computer before formatting the card.
31