Other Functions - Elmo QBIC MS-1 Kurzanleitung

2. With the camera powered off, connect the camera
to your computer using the supplied USB cable.
(Pay attention to the direction of the USB
connector.)
3. Press the [Power Switch].
4. The micro SD card inside the camera is
recognized as a removable disk. A confirmation
sound occurs and the menu appears on the screen
of your computer.
5. Select the menu and operate.
6. Power off the camera. Remove the USB cable rom
the camera and close the Interface Terminal Cover.
*The camera also enters the Mass Storage mode when it is
connected to a computer by the USB cable while it is turned
on.
* Make sure to close the cover correctly. Otherwise the
waterproof performance may be deteriorated, causing damage
to the camera.

OTHER FUNCTIONS

*Refer to the QBIC MS-1 INSTRUCTION MANUAL
for other functions.
HOW TO FORCE THE CAMERA TO POWER
OFF
When there is a problem with the camera, restart
the camera.
In case that it is not possible to turn off the camera
with normal procedure, you can turn off the camera
by pressing the [Power Switch] for 10 seconds.
All manuals and user guides at all-guides.com
16