Using The Microscope - Levenhuk LabZZ M101 Bedienungsanleitung

Using the microscope

Getting started
Unpack the microscope and make sure all parts are available.
Move the stage to the lowermost position using the focusing knob.
Make sure the batteries are correctly installed in the battery compartment; insert new batteries
if required.
Insert the eyepiece into the eyepiece tube.
Slowly adjust the illumination brightness, from dark to light.
Focusing
Select the 4x objective rotating the revolving nosepiece.
Move the specimen to place its thickest part exactly under the objective.
Rotate the focusing knob to slowly raise the stage until the objective is close to the specimen;
keep checking the distance between the objective and the object to avoid their contact.
CAUTION: The objective should not touch the specimen, otherwise the objective or/and the specimen
might be damaged.
Look through the installed eyepiece and lower the stage slowly rotating the focusing knob until you
see the specimen image.
Such adjustment protects the frontal lens from contacting the object when you use objectives of other
If the image is too bright, rotate the diaphragm disk until the passing light ray is reduced to a
comfortable brightness level. If the image is too dark, select a larger aperture to increase the light ray.
Selecting the objective
make sure it keeps centered when the objective is changed to a more powerful one. Once the segment
Now you can switch to a more powerful objective by rotating the revolving nosepiece. Adjust the image
focus if required.
Type
Head
Optics material
Body material
Eyepiece tube diameter, mm
Eyepieces
Revolving nosepiece
Objectives
Stage, mm
Stage moving range, mm
Focusing
Illumination
Power source
Levenhuk K50 experiment kit
Levenhuk reserves the right to modify or discontinue any product without prior notice.
biological
monocular, inclined 45°
optical plastic
plastic
3 objectives
diameter 82, with specimen holders
coarse
lower LED illumination with adjustable brightness
30
yes
3