Specifications; Using The Microscope - Levenhuk LabZZ M4 Bedienungsanleitung

Levenhuk LabZZ M4 Stereo Microscope
Please read this manual carefully before using your microscope for the first time.
Dear friend!
Levenhuk LabZZ M Series microscope for kids will help you witness the unseen – things so small
that you can't see them with the naked eye! They will help you find out what things around us are
made of and what kinds of secrets are hidden from us in every day life. With a Levenhuk LabZZ M4
microscope, you will make lots of interesting discoveries and create exciting memories!
Remember that following safety rules is absolutely necessary.
Information for parents
Dear adults! Remember that you are responsible for your child at all times. Always ensure the
child's safety when working with the microscope. Read this entire manual carefully, especially the
handling and maintenance instructions. Even if your child is old enough and reads well, repeat all
the rules aloud one more time before beginning to work with the instruments. Make sure that he
or she clearly understands these instructions.

Specifications

Head
Optics material
Magnification, x
Eyepiece tube diameter, mm
Eyepieces
Objective
Working distance, mm
Interpupillary distance, mm
Stage
Focus
Power supply
Illumination
Operating temperature range
Additional accessories
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Using the microscope

Illumination
Insert batteries, turn on your microscope and adjust the illumination.
Preparations
Place a specimen in the center of a blank slide, put the slide on the stage and lock it in place with
stage clips.
Focusing, interpupillary distance
Place a slide on the stage and lock it in place with stage clips. Loosen the locking knob on the
microscope pole and slide the head up or down into a desired position and retighten the locking
knob. Upon completing this process, look through both eyepieces, hold them with your hands and
bring them closer or move them apart until a double image turns into a single image.
Changing lamps and fuses
CAUTION: Before changing a lamp or a fuse make sure the microscope is unplugged from a power
source. Also, wait until the lamp cools down.
binocular, vertical
glass
40
23.2
WF20x (2pcs)
2x
75
55—75
Ø50mm, with stage clips
coarse, 35mm
2 AA batteries (not included in the kit)
upper LED
-5... 40 °C (23... 104 °F)
dust cover
3
EN