Softwarelizenzbedingungen; Open Source-Softwarelizenz - Epson SC-F6300-Serie Benutzerhandbuch

SC-F6300 Series Benutzerhandbuch

Softwarelizenzbedingungen

OPEN SOURCE-SOFTWARELIZENZ

1) This printer product includes open source software programs listed in Section 6) according to the license terms
of each open source software program.
2) We provide the source code of the GPL Programs, LGPL Programs, Apache License Program and ncftp license
Program (each is defined in Section 6) until five (5) years after the discontinuation of same model of this printer
product. If you desire to receive the source code above, please see the "Contacting Epson Support" in the User's
Guide, and contact the customer support of your region. You shall comply with the license terms of each open
source software program.
3) The open source software programs are WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the license agreements of each open
source software program for more details, which are described on \Manual\OSS.pdf in the Software Disc.
4) OpenSSL toolkit
This printer product includes software developed by the OpenSSL project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
5) The license terms of each open source software program are described on \Manual\OSS.pdf in the Software
Disc.
6) The list of open source software programs which this printer product includes are as follows.
GNU GPL
This printer product includes the open source software programs which apply the GNU General Public
License Version 2 or later version ("GPL Programs").
The list of GPL Programs:
linux-2.6.35-arm1-epson12
busybox-1.17.4
udhcp 0.9.8cvs20050124-5
ethtool-2.6.35
e2fsprogs-1.41.14
scrub-2.4
smartmontools-5.40
GNU Lesser GPL
This printer product includes the open source software programs which apply the GNU Lesser General
Public License Version 2 or later version ("Lesser GPL Programs").
The list of LGPL Programs:
uclibc-0.9.32
libusb-1.0.8
zeroconf 0.6.1-1
iksemel-rev25
e2fsprogs-1.41.14
Softwarelizenzbedingungen
125