Schou 547705 Gebrauchsanweisung Seite 82

Cleaning the gas supply pipe Parts and specifi cations
If the patio heater is not used for a prolonged
period of time, dust, dirt and insects can
block the gas supply pipe and the openings
Refl ector
at the pilot and burner. Flame screen
Burner base
If this happens, remove the burner head and
Air admittance fence
Gas valve controller
gas supply pipe.
Base of control housing
Press and hold the adjustment button and
blow the pipe clean using compressed air.
Post
Refi t the parts.
Connect the gas bottle and open the
regulator.
Turn the adjustment button to the dot after
the PILOT position and hold it in for 3-4
Tank housing
minutes before trying to ignite the patio
Post bracket
heater.
Stand
82