Community Playthings W476 Outlast Gebrauchsanleitung

Product guide
W476 Outlast balancing beam
IMPORTANT
Save these instructions for reference
Recommended use
The Balancing beams are a safe challenge for two year olds
and match the height of the lowest Toddler platform.
For ages 24-36 months
WARNING
c This product is intended for use by children of immature judgment
and therefore adult supervision is required at all times.
c The Toddler balancing beams are part of an open-ended active play
system. Children can place this product in combination with other
objects to create an injury hazard.
c Caregivers are responsible that platforms and beams are configured
to support age-appropriate challenge.
c To prevent injury, maintain a clear zone of at least one metre around
product(s).
If your shipment is incomplete, please call customer
service. All the packaging from this product is recyclable
(cardboard and LDPE). Please recycle in accordance with
local guidelines.
Maintenance
Acetylated wood weathers to a natural silver grey if left untreated
outdoors. If you prefer the original look, scrub with a mild detergent
solution. When dry, apply a tinted, nontoxic penetrating stain, then
apply a nontoxic mildewcide to minimize mildew growth.
Community Playthings, Brightling Road, Robertsbridge, TN32 5DR
communityplaythings.co.uk • sales@communityplaythings.co.uk • 0800 387 457
© 2019 by Community Products (UK) Ltd •
BS92 Eu 0656 Revision 00
Periodically inspect for splinters, broken or loose parts, and/or
malfunctions. Remove from service if any condition develops that
might make operation unsafe.
Construction
The wooden components are manufactured from long lasting
acetylated wood and finished with a tinted nontoxic stain. All edges
and corners are rounded for safety and ease of cleaning.
Stainless steel hardware is used throughout and plastic components
are formulated to ensure long life in outdoor environments.
Cleaning
Mud and dirt can be removed with a scrub brush and water. Over time
in outdoor settings, some surfaces may blacken with mildew. This
can be removed by using a stiff brush, and scrubbing the surface with
water and a mild cleaning agent (Milton Sterilising Fluid works well).
User modifications
We cannot be responsible for modifications made by customers to our
products in the field without our supervision, testing, or evaluation.
Ordering parts
To order replacement parts, contact customer service with a
description of the part(s) needed and the ID code from the product.
Use only replacement parts supplied by
Community Playthings.