Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A10
COMPONENT PARTS
1.
Handle
2.
Cover
3.
Dust full indicator
4.
On/off switch
5.
Container lock tab
6.
Dust container
7.
Hose
8.
Aluminum tube
9.
Suction hole
10. HEPA filter
11. Dusting button
12. Air outlet
13. Power cord and plug
14. Crevice nozzle
Substances to be vacuumed: Cold ashes from fireplaces, wood/coal stoves, ashtrays, grill, etc.
"Cold Ash" is the ash cooled down for a sufficient time without any embers inside. This can be confirmed
by scouring the ash by using metal tools before using the appliance. Cold ash does not emit any
recognizable heat.
Restriction of use:
1.
Do not use for the separation of health-hazardous dusts (dust classes L, M, H)
2.
Do not vacuum soot.
3.
Vacuum ashes only from admissible fuels.
4.
Do not vacuum any hot, burning or glowing objects.
5.
Do not vacuum any object that is hotter than 40 °C.
6.
Do not vacuum any flammable substances.
7.
Always check the hose and the appliance for overheating when vacuuming.
NOTE: This appliance has a safety system of overheating protection which will automatically switch off the
unit when overheated. If overheating occurs, switch off the appliance, remove the plug from the socket, and
let it cool down for at least 30 minutes to start the machine again.
OPERATION
1. Open the cover of the appliance, check that the HEPA filter is in position and the butterfly nut is tightened.
(Fig. 1)
2. Take the hose, the aluminum tube and crevice nozzle out of the dust container. Place the cover back.
Fasten the dust container with the cover firmly by the container lock tabs. (Fig. 2)
3. Insert the hose into the suction hole. Turn the hose clockwise to fix it by the slot in the brim of the suction
hole. Make sure they are connected firmly. (Fig. 3)
4. Insert the aluminum tube into the other end of the hose. (Fig. 4)
Optionally, insert the crevice nozzle into the aluminum tube. (Fig. 5)
5. Unwind the power cord. Plug in the appliance; press the on/off switch to run the machine.
6. When the dust full indicator shows red, please clean the appliance.
7. If the suction power decreases, press and hold the dusting button during use for self-cleaning. The
appliance will shake the HEPE filter to get rid of the dust. For better performance, you can press that
button while having the aluminum tube covered against the ground.
8. Press the on/off switch to turn off the appliance, and then unplug it.
NOTE: The hose can also be inserted into the air outlet for air blowing function. Blow the trash as needed.
When people leave, please unplug the appliance.
- 10 -
EN
Werbung
