Storage And Transport; Disposal And Recycling - Zgonc yellow ProfiLine YPL 711 Bedienungsanleitung

The printing of the type designation on the connection
cable is mandatory.
AC motor:
• The mains voltage must be 220-240 - 240 V~.
• Extension cables up to 25 m long must have a
cross-section of 1.5 mm
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
WARNING! There are no parts inside the power
tool which can be serviced by the operator! Never
open the power tool! Take it to a qualified special-
ist for further maintenance!

11. Storage and transport

1. Whenever you do not use the power tool, you must
keep it in a dry and well ventilated place out of
the reach of children, e.g. on a high cabinet or in
a closed place.
2. Keep power tool, instruction manual and acces-
sory parts, if any, together in the original packag-
ing, if possible. Thus you have all information and
parts available at any time.
3. Always hold the power tool by its handle.
4. To avoid transport damages, you must pack the
power tool or use the original packaging.
5. Protect the power tool against vibrations and
shock, especially during transport in vehicles.

12. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused
or recycled. The equipment and its accesso-
ries are made of various types of material,
such as metal and plastic. Defective compo-
nents must be disposed of as special waste. Ask your
dealer or your local council.
.
2
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product
must be disposed of at a designated collection point.
This can occur, for example, by handing it in at an au-
thorised collecting point for the recycling of waste
electrical and electronic equipment. Improper handling
of waste equipment may have negative consequences
for the environment and human health due to poten-
tially hazardous substances that are often contained
in electrical and electronic equipment. By properly dis-
posing of this product, you are also contributing to the
effective use of natural resources. You can obtain in-
formation on collection points for waste equipment
from your municipal administration, public waste dis-
posal authority, an authorised body for the disposal of
waste electrical and electronic equipment or your
waste disposal company.
GB | 31