Mounting Dream MD5402 Bedienungsanleitung Seite 4

Step 1
Choose rubber feet or carpet nails according to your floor type .
Option
One: Rubber feet for wooden, cement, tile or other hard floor. Adjust
the rubber feet to level/adjust the base if the base is not level.
A
Option
Two: If the stand is placed on carpet, spin to loosen and remove the
rubber feet, install the carpet nail (F) and screw to the end, then
use the nut (G) to tighten the nail.
A
Adjustable foot
Adjustable foot
F
G
Open-end wrench
2