Husqvarna 40-C80 Bedienungsanweisung Seite 5

original batteries, refer to
TECHNICAL DATA on page
9 for specific batteries. The
batteries are software
encrypted.
• Do not use non-rechargeable
batteries.
• Do not try to disassemble or
repair the battery charger.
• Do not connect the battery
charger terminals to metal
objects.
• Use an approved grounded
mains socket that is not
damaged.
1663 - 004 - 09.11.2021
• Regularly examine that the
power cord is not damaged.
Immediately disconnect the
battery charger if the power
cord is damaged.
• If the power cord is damaged
replace the power cord.
• Do not lift the battery charger by
the power cord. To disconnect
the battery charger from a
power outlet, pull out the power
plug. Do not pull the power
cord.
• Keep all cables and extension
leads away from water, oil and
sharp edges. Make sure that
the power cord is not caught
5