Description Of The Touch Screen Wired Controller; Aktivieren Einer Funktion - De Dietrich CLIM'UP DD EMSG 140 Bedienungsanleitung

4 Bedienung
4.3

Description of the touch screen wired controller

Abb.6 Wired controller
1
2
3
4
5
6
Tab.3 Description
Number Name
1 Operating modes
2 Infrared receiver
3 Light sensor
4 Fan
5 Timer
6 Functions
7 Function list
8 ON/OFF
9 Swing
10 Mode
11 Comfort
12 Arrow buttons
14 DIVA airco
7
8
9
10
11
12
AD-3001872-01
Function
Displays in which operating mode the unit is currently operating.
-
Detects the presence of light for the light sensation function.
Change the fan speed, cycling from low to high speed.
Set a timer, after which the unit turns on or off. The
the amount of time before the unit turns on or off.
This button is used to activate available functions. See Aktivieren einer Funktion, Seite 14.
Displays which functions are activated.
Turn the unit on or off.
When the unit is in standby, the display shows the room temperature and all other con­
tent is not shown.
When the unit is on, the display shows the set temperature and any information regarding
operation mode, functions, fan speed etc.
Turn the swing function on or off. When activated, the
turned off, the icon will disappear.
If the unit has swing positioning function, the swing angle can be regulated in order from
top to bottom for up/down swing units. For left/right swing units, the swing angle can be
regulated in order from left to right.
Change the operating mode in the following sequence: AUTO - COOL - DRY - FAN -
HEAT.
The initial set temperature for each mode is 24 °C.
In FAN mode, there is no auto fan speed or set temperature.
Activates or deactivates the comfort function. The default set temperature when in COOL or
DRY mode is 26 °C and in HEAT mode is 24 °C. The set temperature can be adjusted with
the and button.
Change the set temperature by 1 °C when pressing the
In COOL, DRY and HEAT modes, the set temperature range is 16-32 °C. The display will
show Set temp. when adjusting the set temperature
4.3.1
Die verdrahtete Regelung ist eine allgemeine Regelung. Welche
Funktionen verfügbar sind, hängt vom Typ der Klimaanlage ab.
Wenn eine Funktion aktiv ist, wird auf dem Display der Regelung ein
Symbol angezeigt. Ihr Gerät kann über die folgenden Funktionen
verfügen:

Aktivieren einer Funktion

and can be used to determine
or icon will light up. When
or button.
7784449 - v.01 - 02022021