Maintenance - Ahrend 500 Gebrauchsanweisung

Maintenance

These instructions for maintenance are intended for
both the professional cleaner and the user of the work-
station.
Never use benzine, acetone, turpentine, petrol or other
aggressive substances, solvents or abrasive cleansers.
Maintenance-free parts
With normal use the runners of the drawers and pull-
out frames should not require any maintenance.
Cleaning work surfaces
Normal stains (coffee, tea, pencil,
lipstick, finger marks, grease, water
soluble glue, felt tip pen ink etc.)
can be removed with a clean, damp
cloth. If necessary, a little soft soap
may be added to the water and a
soft nylon brush may be used to
treat more stubborn stains.
Solvent-based lacquer, glue, nail
varnish, ballpoint pen ink etc.
should be removed with an organic
solvent, such as methylated spirits.
36
Service
We advise you to contact your supplier when moving
offices or reconfiguring the workstation.
Assembly
A set of assembly instructions is available for companies'
in-house technical services departments.
Ahrend code 0160 1071.
Cleaning veneered work surfaces
Wipe with a clean, damp cloth if
necessary. A little soft soap may be
added to the water to treat more
stubborn stains.
English
Cleaning plastic parts
All plastic parts may be cleaned
with a soft cloth, dampened if
necessary. More stubborn stains
caused by glue, felt tip pens, ball-
points etc. can be treated with
lukewarm water and a little soft
soap, if necessary.
Cleaning chrome and enamelled
metal parts
All coloured metal parts may be
cleaned with a soft cloth, damp-
ened if necessary. More stubborn
stains caused by glue, felt tip pens,
ballpoints etc. are best treated with
lukewarm water and a little soft
soap. Methylated spirit may be used
if necessary.
Locks
The efficient working of locks can
be promoted by spraying a special
lubricant (such as Lubrikote)
sparingly into the cylinder.
Tools
A service kit containing the tools
required for Ahrend 500 is available
from Ahrend.
Ahrend code 0160 8217.