Ahrend 500 Gebrauchsanweisung Seite 34

5
6
Mounting straight drawer dividers
Depress the divider at one end.
Place at desired position in drawer
and release.
The divider will lock itself in
position.
English
Accessories for drawer pedestals 42.5 cm wide
Suspension file supports in A4 drawers
The A4 drawers have a 30 cm high front. The telescopic
version of the drawer is supplied with two A4 format
plastic suspension file supports (see the enclosed assem-
bly instructions for how to put the supports together).
The supports can be installed in the drawer in one of
two ways: either next to each other (fig. 5) or one
behind the other (fig. 6). This depends entirely on your
own personal preference. The suspension file supports
may be removed from the drawer when full.
The single runner drawer (which cannot be fully pulled
out) is fitted with a metal suspension file support in
which A4 suspension files may only be kept one behind
the other.
A6/A7 drawers
You can split these drawers up into compartments to
suit your own needs with the aid of straight dividers or
angled stationery slopes.
Mounting angled drawer dividers
The stationery slopes can be fixed in
different positions, so that the num-
ber fitting into a drawer will vary.
7
Mounting straight drawer dividers
The dividers are provided with
springy lugs on the sides, which
engage with the slots in the walls of
the drawers.
Accessories for drawer pedestals 31.5 cm wide
Suspension file supports in A4 drawers
The A4 drawers are supplied with a suspension file sup-
port with two movable suspension rails that can be
shifted to take suspension files of different sizes such as
A4, folio and foolscap.
A6/A7 drawers
These drawers can be split up into compartments with
the aid of dividers (fig. 7).
Built-in safety in all drawer pedestals
When one drawer is open, the other drawers cannot be
opened. They are blocked to prevent the drawer
pedestal from tipping over. The materials drawer (if
fitted) can always be opened, even when another draw-
er is open.
33