Laserworld ES-800S RGB 3D Bedienungsanleitung Seite 8

Manual: Evolution Series ES-800S RGB 3D
Connect a DMX controller to operate the laser.
Use the switches 1 - 9 to set the DMX address of the laser. Each switch represents a num-
ber. To define a number use the preceding number and multiply it by 2:
1
Switch
Number 1
This laser uses 5 DMX channels, so make sure that the next device uses an address that
doesn't overlap with this range.
Channel
1
2 & 3 together
Pattern selection
4
Strobe
5
Please note that not each pattern can be combined with each effect.
7. To turn off the device, press the power switch („OFF"), turn off the key switch and dis-
connect the power cable from the mains.
page 8 / 26
2 3 4
2 4 8
Value
0 - 69
70 - 136
137 - 205
206 - 255
0 - 28
29 - 255
0 - 255
0 - 20
21 - 255
5 6 7
16 32 64
Function
Laser off
Sound mode
Automatic mode
DMX mode
no effect
rotation with increasing speed
pattern selection
no effect
strobe with increasing speed
8 9 10
128 256 Mode Switch