Microwave Cooking - Hoover HMG28PNC3 Bedienungsanleitung

Operation Instructions
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press " " twice, the hour figures will flash.
" " "
2) Press
or
3) Press " ", the minute figures will flash.
" " "
4) Press
or
5) Press " " to finish clock setting. ":" will flash, and the time will light.
Note: 1) If the clock is not set, the clock would not function when powered.
2) During the process of clock setting, if you press "
will go back to the previous status automatically.

2. Microwave Cooking

Press " " , t h e L C D will display "P100". Press "
for times or press
"
"P30" or "P10" will display for each added press. Then
" "
" "
to set cooking time from
or
cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press "
2) Press "
power.
3) Press " " to confirm, and the screen displays "P 80".
4) Press
" "
"
or
5) Press " " to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
" to adjust the hour figures, the input time should be within 0--23.
" to adjust the minute figures, the input time should be within 0--59.
to choose the power you want,
" "
"
or
" once, the screen displays "P100".
" once again or press
to adjust the cooking time until the oven displays "20:00".
"
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
GB
press "
0:05 to 95:00. Press
" "
" "
to choose 80% microwave
or
13
", the oven
"
and "P100", "P80" "P50", ,
" to confirm, and
" " again to start
press