Heinner VUM01 Anleitung Seite 5

All manuals and user guides at all-guides.com
machine is used in commercial, trade or industrial
business or for equivalent purposes.
Technical data
No load speed: 11000-23000rpm
Voltage: 230V
Frequency: 50Hz
Rated Power: 300W
Oscillation angle: 3°
Guaranteed sound power level LwA: 98 dB(A)
Tool description
1 – On/Off switch
2 – Speed control
3 – Handle
4 – Allen wrench
5 – Sanding plate
6 – Sanding sheets
7 – Scraper
8 – Plunge-cut saw blade
Before starting the equipment
Mounting the handle
Screw the handle (6) onto the multifunction tool
on the left if you are right-handed and on the right
if you are left-handed.
Depending on the application, mount the proper
tool.
If you accidentally switch the multifunction
tool on, you could injure yourself on the
moving parts that are oscillating. Before mounting
accessories, disconnect the multifunction tool
from the power supply.
MULTIFUNCTION TOOL
If you mount the tools incorrectly and they are
therefore able to come into contact with your
hand during use, there is a risk of injury (eg. The
blades should not be pointing towards your hand).
You can use the following tools to process the
listed materials:
Plunge-cut saw-blade:
Hard and soft woods
Scraper
Layers of paint and laquer
Synthetic coatings
Flexible floor coverings (carpet, linoleum)
Sanding plate
Hard and soft wood surfaces
Layers of paint and laquer
Operation
The multifunction tool does not rotate the fitted
tool; instead, it oscillates back and forth.
Connect the multifunction tool to a power plug.
Switch the extractor on. Use the On/Off switch to
switch the multifunction tool on.
Use the speed control to adjust speed. Set the
speed control to level 1 for low vibration
(oscillation) and to level 6 for intense vibration.
To finish work take the multifunction tool out of
the work piece, switch the tool off and remove the
power plug.
Some malfunctions may be caused by minor faults,
which you can resolve yourself. Follow the
instructions in the list below for this. If the issue is
still not solved, contact customer service.
5