Teach-Off Of The Room Control Unit From A Heating Zone; Teach-In With Alpha Ip Access Point - Alpha IP FAL 210 1-Serie Bedienungsanleitung

Commissioning

7.4 Teach-off of the room control unit from a heating zone

1. Choose the channel through which the room control unit shall be taught-off, by a short press of the
Select key (B). Pressing 1x = HZ1 / Pressing 2x = HZ2.... Pressing 10x = HZ10
2. Press the System key (A) and the Select key (B) simultaneously until the LED of System key (A) of the
base station lights up in green.
If the room control unit is logged on to several Alpha IP base stations, this process must be
repeated for every base station.
During this process, the room control unit is learnt off all heating zones of the selected base
stations.
3. Resetting the room control unit to factory settings (see manual of the respective room control unit).

7.5 Teach-in with Alpha IP Access Point

For a control via the Alpha IP app, the teach-on of the Alpha IP base station must be performed via
the Access Point (HAP 21001).
Prior to the conversion from standalone operation to operation via the Alpha IP Access Point
(HAP 21001), the factory settings must be reset for the participating devices. The teaching
process of the devices is subsequently performed via the Alpha IP App.
Teach-in the device as follows:
Ö The Alpha IP Access Point has been set-up via the Alpha IP app (see manual HAP 21001).
1. Open the Alpha IP app on your smart phone.
2. Select the menu item Teach-in device.
3. Press the System key (A) shortly until the LED flashes slowly in orange. The teach-in mode is active
for three minutes.
4. The device will be displayed automatically in the Alpha IP app.
5. For confirmation, enter the last four digits of the device number (SGTIN) or scan the supplied QR
code. The device number can be found below the supplied QR code or directly on the device.
The LED will light up in green after a successful teach-in process. The process must be repeat-
ed if the LED lights up in red.
6. Follow the directions of the app.
28
All manuals and user guides at all-guides.com