HomeMatic IP HmIP-SMI55-2 Montage- Und Bedienungsanleitung Seite 41

You can connect the device to the Access Point or
to the Central Control Unit CCU2/CCU3. For
detailed
Homematic IP User Guide, available for download
in the download area of www.homematic-ip.com.
To integrate the motion detector into your system
and enable it to communicate with other Homematic
IP devices, you must teach-in the device to your
Homematic IP Access Point first.
To teach-in the motion detector, please proceed as fol-
lows:
• Open the Homematic IP app on your smart-
phone.
Select the menu item "Teach-in device".
•
• To remove the electronic unit (B) of the motion
detector from the frame, take hold of the sides of
the electronic unit and pull it out (see figure 5).
• Turn over the electronic unit.
• Remove the insulation strip from the battery
compartment of the electronic unit to activate
the device. Pairing mode remains activated for 3
minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (E)
briefly (see figure 5).
information, please refer
Start-up
to the
41