General Information; Guidelines Concerning The Safety Of Use - Nabo KT 3100 Gebrauchsanweisung

Dear Customer,
Some provisions in this user manual are unified for refrigerating products of different types
(for a refrigerator, refrigerator-freezer or freezer). CAREFULLY READ THE INSTRUCTION
MANUAL.
The Manufacturer shall not be held liable for damage arising from the failure to observe
the instructions contained in this manual.
Keep this manual for future reference, or to pass it over to the next user.

General information:

The appliance is a refrigerator made as a cabinet and designed for a short-term storage of
chilled products. This appliance is intended for domestic or similar applications, such as: in
shops, offi ces and other similar working environments; in agricultural areas; by customers
in hotels, motels etc. and similar establishments; in bed-and breakfast type environments.

GUIDELINES CONCERNING THE SAFETY OF USE

General safety requirements:
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-
–
in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the
–
defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the appliance refrigeration system.
–
WARNING: Do not use electrical appliances inside the food storage
–
compartments of the appliance, unless they are of the type recommended by
the manufacturer.
WARNING: When positioning the appliance, ensure the supply cord is not
–
trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power
–
supplies at the rear of the appliance.
WARNING: Disposal of the appliance should be according to national rules.
–
WARNING: Do not damage the appliance refrigeration system. It contains
the refrigerant gas R600a. If the refrigeration system is damaged:
Do not use any open flame.
•
Avoid sparks-do not turn on any electrical appliances or lighting fixtures.
•
Immediately ventilate the room: air the room in which the appliance is placed for a
•
few minutes (the size of the room for a product containing isobuthane / R600a
must be at least 4 m ) to avoid damage to the cooling system.
3
GB
12