2.2. AUTO
Auto operation allows to random playback the internal sequences. They are played back
according to the internal system settings.
Select „AUTF" for fast run by navigating with the „Up" / „Down" buttons and confirm with
„Enter".
Select „AUTS" for slow run by navigating with the „Up" / „Down" buttons and confirm with
„Enter".
Select „AUTH" for slow run for white color by navigating with the „Up" / „Down" buttons and
confirm with „Enter".
2.3. DMX 512
The DMX mode requires a DMX controller or a Master laser (see 2.4. Master-Slave operation)
to be connected to the laser.
To switch to DMX mode, select „A001" by navigating with the „Up" / „Down" buttons. Use the
„Up" / „Down" buttons to set the desired DMX address and confirm with „Enter".
DMX Chart
The laser uses 7 DMX channels, so make sure that the next device uses an address that doesn't
overlap with this range.
Channel
1
Operation mode
2
Red Laser Dimmer
Green Laser Dimmer
3
4
Blue Laser Dimmer
5
Strobe
6
Rotation Speed
Rotation Direction
7
English
Value
Function
0 - 49
Laser off
50 - 99
AUTO Fast Mode, seven-color laser effect
100 - 149
AUTO Slow Mode, seven-color laser effect
150 - 199
AUTO White Mode, white color laser effect
200 - 255
DMX Manual Mode, CH2~CH7 valid
0 - 255
Dimmer laser output power from 0% to 100%
0 - 255
Dimmer laser output power from 0% to 100%
0 - 255
Dimmer laser output power from 0% to 100%
0 - 4
No strobe
5 - 255
Strobe from fast to slow
0 - 255
Speed from fast to slow, 255 is stop
0 - 99
Clockwise rotation
100 - 199
No rotarion
200 - 255
Counter clockwise rotation
Manual: FX Series
page 9 / 26