Technical Data - Outwell KATLA CAMPING HEATER Bedienungsanleitung

UK: INSTRUCTION MANUAL
• If the overheat protection has been triggered, turn the mode control (6) to the OFF [ 0 ] position and
unplug the heater from the wall outlet.
• Let the heater cool for about 10 minutes.
• Eliminate the cause of the overheating (for example, excessive dust in the heater, or the air outlet is
covered) and start it up again.
• If after eliminating the cause you still cannot switch the heater back on, or if the overheat protection circuit
switches on without an apparent reason, contact your local store or Oase Outdoors for advice.
MAINTENANCE & STORAGE INSTRUCTIONS
• To keep the heater clean, the heater body (1), mesh (2), base (9) and handle (4) may be cleaned with a soft
damp cloth. You may use a mild detergent if necessary. After cleaning dry the unit with a soft cloth.
• Wait until the unit is completely dry before using it.
• Do not use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the heater. This
may cause damage or deterioration to the surface of the heater.
• If the heater will not be used for a long period of time, store it in a cool, dry location. To prevent the heater
getting dusty or dirty keep and use the original packaging for protection and storing.

TECHNICAL DATA

220-240V 50-60Hz, 1800W
Class II appliance
Nominal heat output (Pnom): 1.8 kW
Minimum heat output (Pmin): 1.0 kW
Maximum heat continuous heat output (Pmax,c): 1.8 kW
Type of heat output/room temperature control: With mechanic thermostat room temperature control.
Dispose of appliance as
electronic waste according
to local regulation
5