TFA VIEW SHOW Bedienungsanleitung Seite 20

6.2.1 AutoDim function
If you wish, an automatic dimming function can be activated during night time.
y
y The display illumination is then automatically switched to level 1 (minimum brightness) for the specified time slot.
Press and hold the SNOOZE/LIGHT button for 3 seconds. AUTO DIM appears on the display and OFF (default) flashes.
y
Press the + or - button (Fig-2-F+G) to select ON.
Confirm the setting with the SNOOZE/LIGHT button.
y
The start time flashes (23:00 default). Use the + or - button to adjust the start time.
y
Confirm with the SNOOZE/LIGHT button.
y
The stop time flashes (6:00 default). Use the + or - button to adjust the stop time.
y
Confirm with the SNOOZE/LIGHT button.
y
6.3 Description of the display areas
On the VIEW SHOW projection alarm clock cat.no. 35.8002.01, most of the display areas have multiple function options. When there is an
online connection, the standard function (without online connection) is either changed/extended or completely replaced by another function.
6.3.1 Display area: weekday, time, date (Fig.1-A)
Standard function (without online connection)
In the normal display, the day of the week, the current time and the date are shown here.
y
In the settings menu or for the projection function, information on the respective setting option is displayed in this area.
y
Information and status requests (see point 6.8 to point 6.10) are also displayed briefly in this area.
y
With online connection / display area for stream info function
After a successful connection via the local network, a radio symbol
y
(above the seconds).
If you use the "Stream Info" function via the app, the selected additional weather information or personalised messages (up to 3 pieces of
y
information can be actively selected) are displayed in this area, alternating with the normal display. The alternation is every 5 seconds.
The day of the week, current time and date are only permanently displayed if no additional information/message is set for the device via the
app in "Stream Info".
6.3.2 Display area: Indoor temperature and humidity (Fig.1-B)
Standard function (without online connection)
Display of indoor temperature and humidity
y
With online connection
y No additional function or change
If the AutoDim function has been activated, in the time area (Fig.1-A)
(above the seconds) "AutoDim" is permanently shown in the display.
symbol is permanently displayed in the time area
20