Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning Instructions; Troubleshooting - CombiSteel 7455.0170 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

All manuals and user guides at all-guides.com
The disassembly activities are performed in the opposite way than what described in the assembly phases.

CLEANING INSTRUCTIONS

As a precaution, always unplug your appliance before cleaning it.
1. After using the Immersion Blender and Whisk in a hot preparation, cool the bottom of the stick in cold water
before dismantling the bell from the stick. After completion of preparation, clean immediately to prevent food
from sticking to surfaces.
2. Never put the motor unit and its handle in water, clean them with a damp cloth or a sponge.
3. Blender Stick and Bell cleaning: Place the stick and bell into a suitable container with clean water and switch
on for a few seconds to clean the bell and stick. WARNING: Always dry the blades thoroughly after cleaning to
avoid spotting.
4. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
5. It is vital to clean it thoroughly between each job using a detergent or disinfectant, but never use pure bleach.
For plastic parts, do not use detergents that are too alkaline.

TROUBLESHOOTING

If it is due to a power cut or if the appliance has been unplugged, release the on-off button (No.3), check the
power supply and then restart the appliance.
If it is due to overheating of the machine, release the on-off button (CB), and then unplug the appliance, wait a
few minutes for the motor to cool down and the thermal safety mechanism to be at reset, and then restart the
appliance.
If you cannot locate the cause of the problem: release the on-off button (CB), unplug the appliance, check:
1. the plug
2. that the blades are free to rotate in the bell,
3. that state of the power cord,
4. that drive shaft is free to rotate. To do this, remove the bell and test the rotation of the end of drive shaft
manually.
If a malfunction occurs which is not on our list of possible faults, consult your retailer or return the appliance to
the after-sales services.
8
www.combisteel.com

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

7455.01757455.01807455.01857455.0190

Inhaltsverzeichnis