Introduction; Operating Instructions; Starting And Stopping The Blender; Continuous Operation - CombiSteel 7455.0170 Gebrauchsanweisung

All manuals and user guides at all-guides.com

INTRODUCTION

1. We advise you to carefully read the instruction included in this package.
2. If you wish to make the best use of the Immersion Blender and all its possibilities, you must be thoroughly
familiar with its performance and operating features.
3. Maintenance requires just a few simple operations that may be carried out by the operator.
4. To ensure a long life and minimize operating costs, you should carefully follow the rules given in this manual.
5. The manufacturer has designed the Immersion Blender to ensure safe operating conditions:
Exclusion or removal of the safety features installed by the manufacturer will seriously undermine the
guaranteed safety conditions.
6. To ensure these conditions you must also fully comply with the instructions regarding the installation and
power supply of the Immersion Blender.
7. The Immersion Blender must be installed in a work environment free of corrosive agents.
8. The installation site must not be subject to explosion.
9. Use only original SPARE PARTS.
10. This manual instruction is an integral part of the Immersion Blender and must be kept in a safe place. The
features, information and drawings published in this manual are the exclusive property of the manufacturer.
11. The appliance's functions make it possible to carry out all types of processing in the minimum of time with
below recommended food: thick vegetable, soups, mashed potatoes, creams, batters, mayonnaise, almonds pulp,
cream cheese and other similar foods.

OPERATING INSTRUCTIONS

CAUTION: Before connecting your units to the power supply, make sure the machine's electrical specifications,
printed in the unit's rating plate, meet your local power supply.

STARTING AND STOPPING THE BLENDER

1. Check that the on-off button (No.3) is in the released position.
2. Connect the appliance to the power supply.
3. Insert the stick or whisk into the appliance.
4. Press and hold down the safety button (No.1) if the appliance has
one.
5. Press the on-off button (No.3), and the blender will start up.
6. To stop the blender, release the on-off button (No.1) and then the
safety button (No.1) will release automatically.

CONTINUOUS OPERATION:

Follow steps 1 to 5 above, then:
6. While the on-off button (No.3) is in the depressed position, press the locking button (No.4).
7. Release the on-off button (No.3), and the appliance will function continuously.
8. To stop the appliance, press and release the on-off button (No.3).

VARIABLE-SPEED OPERATION

Follow steps 1 to 5 above, then:
9. Change the speed of the motor by turning the variable speed button (No.2) towards the maximum or minimum
as required. It is advisable to start at a low speed when using the whisk. With the self-regulating speed system,
once you have selected a speed, it will remain constant, even if the consistency of your mixture changes.
6
www.combisteel.com