Replacing The Fuse; Technical Specifications - EuroLite Controller Pro Bedienungsanleitung

There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Fuse:
Dimensions (LxWxH):
Weight:
Accessories:
EUROLITE LED Neon Flex 230V EC RGB 100cm
EUROLITE LED Neon Flex EC RGB Straight Connector
EUROLITE LED Neon Flex EC RGB flexible Connector
EUROLITE LED Neon Flex EC RGB End Cap
EUROLITE LED Neon Flex EC RGB Power Contact Pin
EUROLITE LED Neon Flex EC RGB Middle Contact Pin
EUROLITE LED NeonFlex EC RGB Aluminium Channel 5cm
EUROLITE LED NeonFlex Aluminium EC RGB Chann.100cm
EUROLITE LED Neon Flex EC Heat Shrinkable Tube
All information is subject to change without prior notice. © 17.08.2017
All manuals and user guides at all-guides.com
230 V AC, 50 Hz ~
max. 1000 W
F 10 A, 250 V
155 x 125 x 55 mm
0,6 kg
12/12
No.
50499700
50499720
50499722
50499725
50499730
50499735
50499739
50499745
50499605
00053574, Version 1.2