hanseatic HAP55055WKC Gebrauchsanleitung Seite 31

Page EN-12 Operation
In total, five different fan speeds can be
set on the appliance using the Mode (10)
and Fan Speed (12) buttons. From lowest to
highest, these are: Sleep/Low/Middle/High/
Turbo.
(13) Timer:
• You can use the timer function to make
the appliance switch itself off after a cer-
tain time. You can choose 1, 4 or 8 hours
(1h, 4h, 8h).
• Press the Timer button (13) as often as
required until the desired time is displayed
above the button. If no time is displayed,
the Timer function is not active.
(14) Reset:
• If the Reset button (14) is held down for
5 seconds, the Filter Change Reminder
LED (11) goes out. However, this does
not mean that the time until the next filter
change is reset. Change the filter within 2
weeks from when the Filter Change Re-
minder LED (11) lights up.
• After you have inserted a new filter, hold
down the Reset button (14) until the Filter
Change Reminder LED (11) flashes once.
This will reset the time until the next filter
change.
(15) Dimmer:
• This button is used to switch the dis-
play (3) and control panel (1) illumination
on and off. This can be useful at night, for
example, if the display is bothering you
when you are trying to sleep.