Hama 00176576 Bedienungsanleitung Seite 5

• Choose Cameras from the list.
• Now confirm that the camera's LED is flashing quickly by
ticking "Next step" and clicking on "Next".
Ensure that the QR code is at the top right.
• Next enter your WiFi password and
confirm with NEXT.
Now scan the QR code with the camera from a distance
of around 15 - 20 cm.
• As soon as you hear a signal sound, click "Signal sound
heard".
• Your camera is now connected.
Connecting Now
• Once the connection is successful, the LED stops
flashing quickly and the app confirms that your camera
is connected. You can now assign it a different name if
you wish.
Added successfully
• Click Finish to end the process.
• You can now operate and configure the cam-
era.
4
Done
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com ð Article Number ð Downloads
ð App Operating Instructions
Note: Pairing restart
First remove the rubber protector on one side of the
camera. Now press the Reset button with a needle or
another thin object until a signal sound is heard. As soon
as the LED starts to flash red, you can start a further
pairing attempt.