What Is Dab; Remote Control - Madison MELODY-PLUS Bedienungsanleitung

WHAT IS DAB?

DAB was developed in Europe by a consortium of broadcasters and manufacturers. DAB uses digital compression
techniques to transform the source material, i.e. music and speech, into better quality audio.
•
Interference free reception : Analogue systems suffer from an effect called "multipath distortion". This is
caused because waves do not behave in an orderly way, but bounce and reflect off buildings etc. DAB+ sees
this as an advantage and uses the direct and reflected signals to actually reinforce the end result, allowing for
better reception.
•
No need to re-tune: A single DAB+ frequency can be used to cover the whole of Europe, so solving many of the
problems experienced with the earlier analogue system. DAB+ can automatically tune-in all of the available
stations in your area.
•
Scrolling Text: Broadcasters can transmit text to your radio. This way you can read the name of the DJ, artist,
song title or any other information they choose.
Instructions of Front panel
CD slot: the unit is fitted with an anti-shock laser that draws the
1.
CD in automatically, so that you don't need a Close button. Just
insert the CD with the label upside gently into the slot and the
player will draw the CD in.
2. USB stick input: plug in a USB stick. The unit will switch to USB
mode and start playing automatically
Headphones output: when a headphone is plugged into this
3.
socket, the sound output will automatically be muted. Unplug the
headphones to get sound output again.
Remote control window
4.
Standby button: Press to enter Standby, press again to activate
5.
the speaker
6. Input selection: Press to select AUX/BT/FM/DAB/
DISC/USB input
In BT/DISC/USB mode: Press to select previous song.
7.
In FM mode: press to decrease frequency, long press to scan previous stations.
In DAB mode, press to start scanning
In BT/DISC/USB mode: Play/pause music.
8.
In FM mode, long press to start auto searching and store stations.
FM band: 87.5-108MHz in 0.1 MHz steps
In BT/DISC/USB mode: Press to select next song.
9.
In FM mode: press to increase frequency, long press to scan following stations.
In DAB mode, press to start scanning
Eject button for the CD player
10.
Display
11.
Volume
12.

REMOTE CONTROL

ON: Switches the unit on.
OFF: Switches the unit off
MUTE: Mutes the audio on the amplifier. Press again to cancel. (Press VOL+ or VOL- will
cancel Mute as well).
INPUT: Select the input source among USB, CD, BT, FM, DAB, AUX in
STOP: Stops the music playback from USB/CD
MENU: In AUX in, CD, USB, BT mode press to select TREBLE, BASS and press VOL+ / VOL-
to increase/decrease bass or treble
IN FM MODE:
Scan setting
Audio setting
MELODY-PLUS
Strong stations
All stations
Stereo allowed
Forced mono
© Copyright LOTRONIC 2020
3