Inhaltsverzeichnis
Werbung
ASSEMBLY
This product is designed to be mounted to the ceiling with ease (pins and screws provided).
1. Firstly, separate the mounting base from the detector by twisting the base a quarter turn
to the right.
2. Hold the base in the desired position, use a pencil to mark the 2 holes, then drill them
and push in the pins, and finally screw the base on firmly.
3. After having carefully installed the battery, fasten the detector to the base by twisting it
in a clockwise direction.
The detector is correctly attached to the base if you hear a small "click".
If you have difficulty in installing your detector, check again that the battery is inserted
correctly.
EN
Holes in the ceiling
Plastic pins
Hooks
Screws
4
Body of the detector
Version: 5.0
19.05.2016
Werbung
Inhaltsverzeichnis
