Read these instructions carefully before operating the machine!
Correct use
Any use beyond this is considered incorrect. The manufacturer accepts no liability for
●
any resultant damage; the user alone bears the risk.
Correct use also includes adherence to the operating, servicing and maintenance
●
conditions recommended by the manufacture.
The relevant accident prevention regulations as well as all the generally acknowledged
●
safety and working practices must be followed.
Unauthorized modifications to the machine exclude the manufacturer's liability for
●
resultant damage.
Before machine use, floorcoverings must be tested for suitability for this cleaning
●
process.
Pay attention to the area compression of point-elastic floors, e.g. in gymnasiums.
●
The manufacturer accepts no liability for damage to equipment and to the floor being
●
cleaned from using the wrong brushes and cleaning agents.
Product liability
The operator's attention is drawn explicitly to the fact that the machines may only be used for
●
their intended purpose. If the machines are not used for their intended purposes, the
user must accept full respon-sibility. Any liability of the manufacturer ist thus excluded.
Sources of risk
When the machine is stationary, the brush unit must be immediately switched off to
●
prevent damage to the floor covering.
During transportation in lifts, the currently valid user instructions and safety regulations –
●
and particularly those concerning maximum loading – must be observed.
Machine operation position
The machine operation position is behind the machine.
●
Approved maintenance staff
The single-disc machine may only be serviced and repaired by per-sons with technical
●
and legal authorization.
Cleaning agents
When using cleaning and care agents, the manufacturer's danger warnings must be
●
followed and protective goggles and clothing must be worn.
Only muse low-foaming, non-combustible cleaning agents which do not contain
●
generally health-hazardous substances.
Explicit reference is made to the risks of using highly flammable, com-bustible, toxic,
●
health-hazardous, corrosive or irritant substances.
Initial operation
Delivery, instruction on safety procedures, handling and maintenance and initial
●
operation are generally carried out by our authorized specialist.
If this should not be the case, the operating company will be responsible for the
●
instruction of the operators.
R 53-1100/1500 UHS
English 6a