Servicing Instructions; Declaration Of Conformity; Environmental Protection - Cleanfix R53-1100 UHS Bedienungsanleitung

5. Service
For repairs, please contact your specialist wholesaler
☞
or one of the service shops.
You will be expertly and quickly served.
☞
This machine is only intended for use on level surfaces
with a maximum gradient of up to 5 %.
This machine is not approved for use on public paths
and roads.

6. Servicing instructions

The following instructions must always be
observed
When cleaning and servicing the machine, replacing
☞
parts or when changing over to a different function,
switch off the drive and remove the plug.
The power supply lead must not be damaged by
☞
driving over it, crushing, tugging etc.
Check the power supply lead regularly for signs of
☞
damage.
The machine must not be used if the power supply
☞
lead is not in perfect condition.
When using or replacing the power supply or
☞
equipment supply leads, use only those specified by
the manufacturer.
When replacing the plug-and-socket connectors of
☞
power supply or equipment supply leads, splash
protection and mechanical strength must be assured.
When transporting the machine in lifts, put the
☞
shaft/bar in a vertical position so that it cannot catch
on the lift walls.
The shaft/bar is automatically secured against recoil
☞
by the patented
Only the spray and cleaning agents suitable for the
☞
machine's purpose may be used.
Never use highly flammable, combustible, toxic,
☞
health-hazardous, corrosive or irritant substances.
Repairs, including the fitting of spray agent lines and
☞
hoses, may only be carried out by approved customer
service shops or by specialists in this field who are
familiar with all the relevant safety regulations.
7. Storage
When the machine is not being used, store it in a dry place
and in normal room conditions (not below under 0°C).

8. Environmental protection

The packaging material can be recycled.
Please do not throw the packaging
material into household waste; please
send it for recycling.
Old appliances contain valuable materi-
als that can be recy-cled; these should
be sent for recycling.. Batteries, oil, and
similar substances must not enter the
environment. Please dispose of your old
appliances using appropriate collection
systems.
R 53-1100/1500 UHS
shaft/bar adjustment unit.

Declaration of Conformity

We,
Cleanfix Reinigungssysteme AG
Stettenstrasse 15 - CH-9247 Henau
declare under our sole responsibility that the product,
Single disc machine
R 53-1100 / R 53-1500
from serial code Nr. 9001 and following
(name,type, serial number)
to which this declaration relates is in
conformity with the following stand- ard(s) or other
normative document(s).
Safety:
EN 60335-1:2002 + am; EN 60335-2-67:2003;
EN ISO 11202:1997; EN ISO 5349-1:2002
EN ISO 11202:1995; EN ISO 5349-1:2001
EMC:
EN 55014-1:00 + am; EN 61000-3-2:2001
EN 61000-3-3:94 + am; EN 55014-2:97 + am
EN 61000-6-3:2002;
EMF:
EN 50366:03
( title and/or number and date of issue of the standard(s) ).
following the provisions of Directive
2011 / 65 / EU - 2006 / 42 / EC - 2004 / 108 / EC
Henau, 17.04.2013
Roland Flück
Director of Development
Cleanfix Reinigungssysteme AG
Roland Flück
Stettenstrasse 15
CH-9247 Henau
Tel. 0041 71 955 47 47 • Fax 0041 71 955 47 60
www.cleanfix.com - info@cleanfix.com
Englisch 9