Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Start-Up
1. Place the units on a flat surface.
2. Place the blade (C) inside the bowl (D) on the blade support pin (E) and the
ingredients to be chopped. Place the bowl-lid (B) in the bowl (D). The gaps of
the lid-bowl have to correspond exactly with the bowl.
3. Place the motor unit (A) on the lid-bowl (B) assembling by twisting it slightly,
so that the blade axis fits into the motor unit axis. Press down on the motor
unit and the chopper starts up immediately.
4. Choose the recommended speed with the switch on the front of the motor
unit.
Position I
for low chopping,
Position II for fast chopping.
5. During processing, hold the motor unit with the one hand and the chopper
bowl with the other.
6. Unplug the appliance and wait for the blade to stop completely. First remove
carefully the blade and then the chopped food.
Food Maximum Operation time / preparation in 500 ml chopper bowl
Cheese........................ 100 g ......... 10 sec
Bread ............................ 75 g ........ 20 sec
Carrot ......................... 200 g ........ 10 sec
Boiled eggs ................. 200 g ......... 10 sec
Garlic........................... 120 g ......... 15 sec
Ham............................. 200 g ......... 15 sec
Hazelnuts .................... 100 g ......... 15 sec
Onions......................... 150 g ......... 15 sec
Parsley .......................... 30 g ......... 10 sec
Shallots ....................... 150 g ......... 10 sec
Spice ............................. 0,2 l ......... 30 sec
All manuals and user guides at all-guides.com
Use
10
Werbung
Inhaltsverzeichnis
