Technical Data - Meec Tools 014168 Bedienungsanleitung

SYMBOLS
The following symbols can be of importance
for how you should use your power tool.
Make sure you understand the symbols
and their significance.
Read the instructions.
Approved in accordance with the
relevant EU directives.
This product has a safety class
II rating. This means it is fitted
with extra or double insulation.
Use ear protection.
Wear a face mask.
Recycle as electrical waste.

TECHNICAL DATA

Rated voltage
Nominal input power
Safety class
Max viscosity
Container volume
Weight
Hose length
Sound pressure level LpA 84 dB(A) K = 3 dB(A)
Sound power level, LwA 95 dB(A) K = 3 dB(A)
Vibration
230 V ~ 50 Hz
800 W
II
100 DIN/s
800 ml
2 kg
1.8 ml
< 2.5 m/s²
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 60745-1:2009.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
PARTS
1. Air nozzle
2. Nozzle
3. Lock ring
4. Front part of spray gun
5. Trigger catch
6. Lock button
7. Back part of spray gun
8. Air filter cover
9. Air hose
10. Lever to adjust material flow
11. Container
FIG. 1
HOW TO USE
THINNER
The material may need to be thinned with a
suitable thinner before spraying. Follow the
instructions of the manufacturer.
Never thin the material more than
recommended by the manufacturer.
EN
29