Installation; Installing The Speed And Pedal Frequency Sensor, Wheel Magnet And Pedal Frequency Magnet - Crivit Pro CBGT 4 A1 Bedienungsanleitung

Installation

Installing the speed and pedal frequency sensor,
wheel magnet and pedal frequency magnet
♦ Fit the speed and pedal frequency sensor to the left-hand side of
the rear wheel fork (opposite side to the chain) using the rubber
ring or the two cable binders. If the sensor does not fit stably onto
the rear wheel fork, place the rubber pad
│
■ 12 GB
under the sensor.
CBGT 4 A1