Step 6
• The bottom handlebar bar is assembled with
the M8x40 bolt and arc washer.
•
Use an allen key to firmly secure the
elements.
Step 7
• Insert the top bar into the bottom bar and
fix it at the desired height by using the
lock button.
• The handlebar assembly is now finished,
your trampoline should look like the
attached illustration.
Step 8
Assembly of the protection equipment:
• Attach each of the 6 elastic bands on
the protection to one of the trampoline
connectors, then attach a rubber band
around the handlebar`s bottom bar.
EN
ASSEMBLY INSTRUCTIONS
17
8.
9.
10.