FF Europe MTRPL03 Aufbauanleitung Seite 16

Step 3
• The main frame of the trampoline is now
open.
• The position of the elastic cords may be
asymmetrical, adjust if necessary.
Step 4
• No tools are required for assembling the feet.
• Turn over the trampoline frame so that the bouncing
surface is against the ground.
• There are plastic end caps on the tubes for
assembling the feet.
• Remove these caps and discard them.
• Screw the feet onto the tubes and put the trampoline
back in position.
Step 5
• The handlebar is assembled onto the top handlebar
bar with the M8x40 bolt and arc washer.
• Use an allen key to firmly secure the elements.
EN
ASSEMBLY INSTRUCTIONS
16
5.
6.
7.