Using The Agfaphoto Powercube 300Pro - AgfaPhoto POWERCUBE 300Pro Bedienungsanleitung

8. USING THE AgfaPhoto POWERCUBE 300Pro

How to provide power for AC appliances with AgfaPhoto POWERCUBE 300Pro?
Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the
power button and the unit will start providing power to your appliances.
The unit provides Modified Sine Wave output, and can be compatible to AC electric appliance that
works with Sinusoidal waveform(power <100W). However, anything that uses an AC motor isn't going
to work to full capacity on a modified sine wave, such as an electrical fan. It will even make the electric
appliance arouse some noise. Appliances like refrigerators, microwaves, and compressors that use AC
motors and some delicate medical equipment will be better or with a pure sine wave inverter. This pro-
duct is only used for emergency.
Short-circuit/Overpower Protection: If the AC output is short-circuited or overpowered (Load(s)
power>120W), the unit will shutdown AC output to protect itself. Please clear the problem and re-
Some devices, such as refrigerator, ice maker or a laser printer may require a peak power to start or
work during a very time period, the peak power could exceed 100W or even higher, this could
Please remove the devices and consult with the device manufacturers for more information. Please
clear the problem and re-press the AC button for AC output.
AC outlets, AC voltage and frequencies are different in different countries.
Please carefully check whether the product specifications are consistent
How to provide power for USB digital appliances with this product?
DC IN
MULTI SAFETY
PROTECTION
DC OUT
USB OUT
12V USB OUT
MULTIFUNCTION
SMART|SAFE|POWERFUL
This product supports Qualcomm
It supports 4V-9V / 2A max output for smart devices which also
The actual output voltage and current depends on the actual smart devices.
It can be obtained by consulting the smart device manufacturer.
ATTENTION
press the AC button for AC output.
cause overpower protection with this unit.
WARNING
with the appliance specifications before use.
Connect the standard USB cable of digital appliance
to one of the two USB output ports of the unit, press
the battery check button to switch on and get power.
NOTE
support Qualcomm QuickCharge™ 3.0 .
�
QuickCharge™ 3.0 output.
�
31